ShineOnYouCrazyDiamond
Flashlight Enthusiast
It's a bummer to have to post this thread, but sometimes we are not able to take all of our projects to completion. A little over one year ago I moved to create the most powerful P60 triple drop-in available at the time. Do to do delays in my personal life I was not able to bring these to market in a timely manner and now it seems a bit like a moot project with some of the other options available on the market.
Moving onto other things I am selling these nearly complete copper P60 drop-ins. All they need is a 17mm driver and a ground wire to complete the setup on each one.
The details:
The driver:
These drop-ins are being sold AS IS. I will not be able to provide any assistance with their completion. As such I am selling them at a very reasonable price.
So to be clear what you are getting with each drop-in is: one copper-heat sink with pre-mounted triple, one Carclo optic, one Vinz spring
I have the following drop-ins available:
1) Nichia 219B Hi-CRI - autogiro - PAID
2) Nichia 219B Hi-CRI - autogiro - PAID
3) Nichia 219B Hi-CRI - EspionageStudio - PAID
4) Nichia 219B Hi-CRI - Hiro
5) XP-L 4000K - EspionageStudio - PAID
6) XP-L 4000K - Hiro
7) XP-L 4000K - MikeB - PAID
8) XP-L 4000K - MikeB - PAID
9) XP-L 5000K - autogiro - PAID
10) XP-L 5000K - autogiro - PAID
Price $30 each via PayPal.
Please state the number(s) you want in your post.
Shipping:
CONUS via USPS Priority Small Flat Rate Box - $6 for any quantity
International - Price TBD at time of purchase based on weight and location
Moving onto other things I am selling these nearly complete copper P60 drop-ins. All they need is a 17mm driver and a ground wire to complete the setup on each one.
The details:
- The drop-in is a silver-plated copper P60 heat-sink made by Mattaus, It includes a threaded grounding post with hex-screw inside the driver area.
- Heavy gauge sliver plated BeCu spring from Vinz.
- Carclo triple
- frosted narrow for Nichia 219B
- clear narrow bored for XP-L by MtnElectronics
- Noctigon copper triple mPCB with a variety of LEDs mounted into heat-sink with Arctic Alumina
The driver:
- You will need to supply a 17mm driver and solder the +/- leads to the led PCB.
- A press fit setup 'may' work but using a ground lead from the set screw to the driver board is recommended.
These drop-ins are being sold AS IS. I will not be able to provide any assistance with their completion. As such I am selling them at a very reasonable price.
So to be clear what you are getting with each drop-in is: one copper-heat sink with pre-mounted triple, one Carclo optic, one Vinz spring
I have the following drop-ins available:
1) Nichia 219B Hi-CRI - autogiro - PAID
2) Nichia 219B Hi-CRI - autogiro - PAID
3) Nichia 219B Hi-CRI - EspionageStudio - PAID
4) Nichia 219B Hi-CRI - Hiro
5) XP-L 4000K - EspionageStudio - PAID
6) XP-L 4000K - Hiro
7) XP-L 4000K - MikeB - PAID
8) XP-L 4000K - MikeB - PAID
9) XP-L 5000K - autogiro - PAID
10) XP-L 5000K - autogiro - PAID
Price $30 each via PayPal.
Please state the number(s) you want in your post.
Shipping:
CONUS via USPS Priority Small Flat Rate Box - $6 for any quantity
International - Price TBD at time of purchase based on weight and location
Last edited:
