Nitecore SRT7 problem
- Thread starter NetNathan
- Start date
Help Support Candle Power Flashlight Forum
Parrot Quack
Flashlight Enthusiast
It reads like the button/on switch is broken and the light needs to go to the hospital.
NoNotAgain
Flashlight Enthusiast
Look inside the tailcap and see if the ring retaining the switch is tight.
Does the switch blink to indicate battery power when inserting a battery?
If no click It sounds like the switch is either lose or defective.
Does the switch blink to indicate battery power when inserting a battery?
If no click It sounds like the switch is either lose or defective.
Yes, I have a pair of tweezers that I use to screw in the aluminum switch retainer in the tailcap. I part the tweezers and put the tips into the holes, then turn them clockwise until it tightens. If this doesn't work, you can get an improved tailcap at Amazon for less than ten bucks.
Do let us know if this fixes your problem.
Do let us know if this fixes your problem.
CelticCross74
Flashlight Enthusiast
also take some rubbing alcohol and a Q-tip and go over all the contact points once youve made sure the switch is tight.
