shrike2222
Flashlight Enthusiast
Surefire E2d Triple Red LEDs 18mm bored
Surefire E2d Custome Triple Red leds
1. Surefire E2d
2. Triple Luxeon Red(627nm) Leds 306lm at 2100mA
3. Triple Cool Base mcpcb
4. Custom Brass heatsink
5. 2280mA Kaidomain KD2 Linear driver for single li-ion battery only acceptable.
Measure tailcap current is 119mA-732mA-2245mA with Panasonic NCR18650A 3100mAh cell.
6. Low-Med-High 3 mode with no memory
7. Carclo 10507 Clear Narrow Optic
8. 18mm bored body to fit only unprotected 18650 battery. I can not guarantee which protected 18650
cell will be fit with this body. So use unprotected cell.
9. Estimated lumen output is 306lm
10. Clip is little broken see photos. And it is little bit rattled.
11. Z57 is new type of switch
12. Used condition. It has many wears. See photos for detail
13. No waterproof. If you want it, glue epoxy or loctite on bezel's screw.
Shipping is registered airmail.
If you wish Express mail, tell me. It's cost is $30
On Sale For: $200 SOLD
--------------------------------------
Surefire E2d Custome Triple Red leds
1. Surefire E2d
2. Triple Luxeon Red(627nm) Leds 306lm at 2100mA
3. Triple Cool Base mcpcb
4. Custom Brass heatsink
5. 2280mA Kaidomain KD2 Linear driver for single li-ion battery only acceptable.
Measure tailcap current is 119mA-732mA-2245mA with Panasonic NCR18650A 3100mAh cell.
6. Low-Med-High 3 mode with no memory
7. Carclo 10507 Clear Narrow Optic
8. 18mm bored body to fit only unprotected 18650 battery. I can not guarantee which protected 18650
cell will be fit with this body. So use unprotected cell.
9. Estimated lumen output is 306lm
10. Clip is little broken see photos. And it is little bit rattled.
11. Z57 is new type of switch
12. Used condition. It has many wears. See photos for detail
13. No waterproof. If you want it, glue epoxy or loctite on bezel's screw.
Shipping is registered airmail.
If you wish Express mail, tell me. It's cost is $30
On Sale For: $200 SOLD
--------------------------------------
Last edited:
