ArmyTek        
Page 2 of 2 FirstFirst 12
Results 31 to 40 of 40

Thread: Tritium vial installation question...

  1. #31
    *Flashaholic* gunga's Avatar
    Join Date
    Nov 2006
    Location
    Vancouver, BC, Canada
    Posts
    7,958

    Default Re: Tritium vial installation question...

    I have 5. Wanted to know if you wanted another.

  2. #32

    Default Re: Tritium vial installation question...

    Oh, I see. I may think about buying one from you at some point but as it stands, just two UV LED flashlight is good enough. It wouldn't hurt to have one more for future project.
    ****** Custom filtered blacklight flashlight based on both Nichia NVSU233A-U365 and Convoy S2 flashlight host (Pictured in avatar icon) ******

  3. #33
    *Flashaholic* gunga's Avatar
    Join Date
    Nov 2006
    Location
    Vancouver, BC, Canada
    Posts
    7,958

    Default Tritium vial installation question...

    Just send me your address and I'll ship one to you.
    Last edited by gunga; 06-06-2016 at 04:25 PM.

  4. #34

    Default Re: Tritium vial installation question...

    gunga, your PM space is FULL.
    ****** Custom filtered blacklight flashlight based on both Nichia NVSU233A-U365 and Convoy S2 flashlight host (Pictured in avatar icon) ******

  5. #35
    *Flashaholic* gunga's Avatar
    Join Date
    Nov 2006
    Location
    Vancouver, BC, Canada
    Posts
    7,958

    Default Re: Tritium vial installation question...

    Cleared!

  6. #36

    Default Re: Tritium vial installation question...

    Responded.

    EDITED: Got my PM?
    Last edited by Dr. Mario; 06-06-2016 at 04:38 PM.
    ****** Custom filtered blacklight flashlight based on both Nichia NVSU233A-U365 and Convoy S2 flashlight host (Pictured in avatar icon) ******

  7. #37

    Default Re: Tritium vial installation question...

    gunga - ordered the LEDs. Now I will have to wait for the purchase confirmation.
    ****** Custom filtered blacklight flashlight based on both Nichia NVSU233A-U365 and Convoy S2 flashlight host (Pictured in avatar icon) ******

  8. #38
    *Flashaholic* gunga's Avatar
    Join Date
    Nov 2006
    Location
    Vancouver, BC, Canada
    Posts
    7,958

    Default Re: Tritium vial installation question...

    Coolio

  9. #39

    Default Re: Tritium vial installation question...

    I have found that it is occasionally better to just transfer some ultraviolet cure adhesive to the 3cc syringe (I already emptied the Bondic glue tube into a medical syringe which I bulk purchased from Amazon for chemical storage like the solder pastes) as it's a lot easier to just press than squeeze so the amount of glue is accurately placed with tapered plastic Luer Lok tip (20 gauges opaque pink tip would work with most low and medium viscosity UV glues - YMMV, however). You will want to have Zip-loc, Luer Lok stopper (for storage), and resealable tin can or something to put it in so it doesn't cure by accident.
    ****** Custom filtered blacklight flashlight based on both Nichia NVSU233A-U365 and Convoy S2 flashlight host (Pictured in avatar icon) ******

  10. #40
    Flashaholic* xdayv's Avatar
    Join Date
    Aug 2014
    Location
    Philippines
    Posts
    1,999

    Default Re: Tritium vial installation question...

    Hi guys, did you have success using CR Laurence UV682/UV604? or other effective alternatives to Norland 61? Thanks.
    Last edited by xdayv; 03-24-2017 at 04:09 AM.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •