***SOLD***
Hello-
Up for sale is a recently purchased SOYCD/JHanko V10r Ti Triple XP-L masterpiece!
Condition: Some minor titanium swirls, but no major scratches, dents, etc. Overall good condition.
****Here is the original sales thread from Mr. SOYCD: http://www.candlepowerforums.com/vb/showthread.php?418195-WTS-SOYCD-Hanko-V10R-Ti-triple-XP-L-HI
And here is what you get!
These full disclosures came from Mr. SOYCD:
"This is an early triple build while I was still figuring out the spacing and measurements. There is no glass lens on the front. The Carclo triple lens is directly exposed so some care in use is recommended. The bezel is permanently glued on so do not attempt to remove or separate the head. To do so will likely cause damage to the setup."
Note: Below pictures show everything that is part of the sale. Please note that the sale DOES NOT include battery.
Terms of sale:
--->For sale for: $225.00 via PayPal
Hello-
Up for sale is a recently purchased SOYCD/JHanko V10r Ti Triple XP-L masterpiece!
Condition: Some minor titanium swirls, but no major scratches, dents, etc. Overall good condition.
****Here is the original sales thread from Mr. SOYCD: http://www.candlepowerforums.com/vb/showthread.php?418195-WTS-SOYCD-Hanko-V10R-Ti-triple-XP-L-HI
And here is what you get!
- SOYCD XP-L HI triple mod with Carlco frosted narrow optic. Triple is made using Noctigon mPCB. Additional copper heat-sinking added to bottom of mPCB for better thermal management and heat transfer to body.
- 3 x XP-L HI U5-4000K LEDs. Includes original box
- Hanko bore for 18mm cells with CR123 adapter sleeve.
- Hanko Ti clip
- Hanko crenelated bezel.
- SOYCD lower-low mod and re-lube ring for better feel.
- Comes with stock V10R Ti switch but ready for a Ku or SOYCD e-switch if you have one.
These full disclosures came from Mr. SOYCD:
"This is an early triple build while I was still figuring out the spacing and measurements. There is no glass lens on the front. The Carclo triple lens is directly exposed so some care in use is recommended. The bezel is permanently glued on so do not attempt to remove or separate the head. To do so will likely cause damage to the setup."
Note: Below pictures show everything that is part of the sale. Please note that the sale DOES NOT include battery.
Terms of sale:
- Continental U.S.A. sales only please
- The first "I'll take it" secures the sale.
- Please pay via PayPal within 6 hours of your bid to purchase the light.
- I reserve the right of refusal of sale to any buyer(s)
- I will take care of shipping via USPS Priority Mail and purchase insurance to cover cost of flashlight
--->For sale for: $225.00 via PayPal
Last edited:
