• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired 3x16650 Rechrgeable $urefire M6 By Fivemega

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,522
Location
California
(NOT AVAILABLE)


(No More Left)


Please allow 7 days to ship

Please note: I will not send email or PM to individuals regarding payment confirmation and shipping status.
All these information will be next to your CPF handle in this post.
All 50 States shipping will come with tracking number but for international orders I will provide label number. Sorry, no tracking available for international orders.


FvL5USj.jpg


IMG_0853_zpsda5gb4tf.jpg


IMG_0851_zpsgkabwt0l.jpg



NO RESERVATION


NO RESERVATION

Please read completly, then pay for next available number, finally post detail or item(s) you pay for.
Your name won't be in the list unless I receive your paypal.
Full payment plus shipping is necessary in order to be in the list unless you pay by USPS MO. There is no refund, exchange or transfer. If you claim and pay, expect to receive within 10 business days in States or 20 days internationally.

Please see discontinued MN bi-pin sockets here
Here is another rechargeable solution for $urefire M6
Simply load up the battery holder with latest version of KeepPower protected new 16650 batteries negatve terminals to spring, insert red marked battery holder to head side of flashlight then install white plastic spacer, finally install tail cap.
Please use with proper bulb assembly like WA1185 in MN bi pin socket as HOLA or WA1331 in same socket as LOLA or WA1166 with 3 IMR 16650 when available. (17670 batteries won't fit)
You can also use LED module which can take 11.1 volt.
Do NOT use with MN20 or MN21
Please see DM51's excellent Shoot out thread.
These battery holders are modified version of aftermarket 3xAA which is converted to take 3x16650, connected in serial (11.1 Volt) and comes with spacer.
No further modification necessary.
A charger like this or this can be used when charging all 3 cells in battery holder.
Please use healthy and uniform protected 16650 batteries which is inserted negative to spring.
First remove lamp module, insert battery holder (red mark in), insert spacer, place tail cap, finally pick proper lamp/LED module for 11.1 nominal volt. (17670 batteries won't fit.
No flashlight, batteries or lamp included nor available.
Also can be used in tri bored 1.25D M*g (without spacer).
For ducumentation purpose, it is necessary to pick next available number, post your CPF handle and detail of your order here and paypal note.
Without above information, I will never figure out what the payment is for and from whom.
Sorry, no replacement parts available for warranty or for sell.
Example: Mr flashmack :paypal: $48 for:
#97 M6 3x16650 battery holder plus shipping.
Price $42 each
Shipping to States $6 for first holder and $8 for any quantity holders.
Internationaly $14 for each holder.
Please don't pay unless you plan to make a note in Paypal.
Paypal: DO NOT PAY
Please PM for alternate payment method.
Any comment welcome.
Your CPF handle in paypal note is critical and very very necessary.
---------------------
Please see 2x26650 M6 Rechargeable kit here.

Some bulbs are available here.

---------------------
#01 Battery holder 3x16650 Kit $42 AK350X paid shipped 9505513808436319032760
#02 Battery holder 3x16650 Kit $42 BlazerNL paid shipped LA046552623US
#03 Battery holder 3x16650 Kit $42 GusManB paid shipped 9500113808426336020885
#04 Battery holder 3x16650 Kit $42 Icarus paid shipped 9505513808417005049910
#05 Battery holder 3x16650 Kit $42 mcm308 paid shipped 9500113808416362046799
#06 Battery holder 3x16650 Kit $42 jimbyjimb paid shipped 9500113808427117041891
#07 Battery holder 3x16650 Kit $42 bigretic paid shipped 9500113808427213051930
#08 Battery holder 3x16650 Kit $42 brighasday paid shipped 9500113808427320063703
#09 Battery holder 3x16650 Kit $42 horizonseeker paid shipped 9505513808438003116640
#10 Battery holder 3x16650 Kit $42 b29driver paid shipped 9500113717668026142852
#11 Battery holder 3x16650 Kit $42 ZombieBob paid shipped 9500113808418038123162
#12 Battery holder 3x16650 Kit $42 FrankH. paid shipped LA046636116US

#13 Battery holder 3x16650 Kit $92 (NON WORKING)
#14 Battery holder 3x16650 Kit $42 djjoonie paid shipped 9500113808418045124084
#15 Battery holder 3x16650 Kit $42 Greenbean paid shipped 9500113808428052078089
#16 Battery holder 3x16650 Kit $42 sidfishez paid shipped 9500113808438066131182
#17 Battery holder 3x16650 Kit $42 Fibo paid shipped LA046636062US
#18 Battery holder 3x16650 Kit $42 Fibo paid shipped LA046636062US
#19 Battery holder 3x16650 Kit $42 DayofReckoning paid shipped 9500113808428150088409
#20 Battery holder 3x16650 Kit $42 7romanstatesmen paid shipped 9500113717678176210516
#21 Battery holder 3x16650 Kit $42 id30209 paid shipped LA046636093US
#22 Battery holder 3x16650 Kit $42 ifyfe paid shipped LH057923237US
#23 Battery holder 3x16650 Kit $42 Bogie paid shipped 9500113808419196228980
#24 Battery holder 3x16650 Kit $42 a1sealbeach paid shipped 9500113808419319252939
#25 Battery holder 3x16650 Kit $42 gravelrash paid shipped 9500113808429357141362
#26 Battery holder 3x16650 Kit $42 sidfishez paid shipped 9500113808420014143880
#27 Battery holder 3x16650 Kit $42 marco.weiss paid shipped LH087848693US
#28 Battery holder 3x16650 Kit $42 badtziscool paid shipped 9500113808420014143873
#29 Battery holder 3x16650 Kit $42 strideredc paid shipped LH088222795US
#30 Battery holder 3x16650 Kit $42 nmiller paid shipped 9500113808410296327757
#31 Battery holder 3x16650 Kit $42 Red-T paid shipped

--------------------------
Your CPF handle in paypal note is critical and very very necessary.
--------------------------
Sorry, no replacement parts available for warranty or for sale.
--------------------------
Please find link of my other products here and click on each link you are interested.
---------------------------

(NOT AVAILABLE)
 
Last edited:

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,522
Location
California
***QUESTIONS?***
Will this setup work in the m6lt?
This system can be used on any M6 that takes MB20 and work with 11.1 volt.
Possible to use a dummy for 7.4 volt operation.

-------------------------
With the WA1185 are the normal 16650 batteries going to work as current draw is "high" (over 3 Amps if I remember correctly) or is it necessary to use IMR 16650?
WA1185 may take up to 3.3 Amps which is within allowance 2C of 2000 or 2500mAh batteries. So no problem at all.
You can also use IMR or go with lower current bulbs such as WA1166 or WA1318 or even WA1331
Also can be used with proper voltage LEDs

--------------------------
I cannot see the pictures of the holders, is it just me??
Photos are working now.
--------------------------
Will there be another run on the sockets?
There is no plan for socket now but you can use IMR-M6 bulb to use with above holders.
--------------------------
FM, do you know of any 16650 that would support 1909 bulb?
If you close look at this, you will see 1909 needs about 5.5 Amps to shine at spec. Even if 2500mAh 16650 can power up this bulb, it would be more than 2C which is not recommended.
I haven't even seen any protected 18650 or 26650 to power up this bulb with first click or any.
Keeppower protected 16650 barely power up (with double click) an WA1185 which is about 3.3 Amps.
So, you will need either IMR cells or 2P/3S similar to MB20 ($urefire M6) which in this case each cell will carry about 2.75 Amps.

-------------------------
Can these be used in a bored 1d mag (with tail spring trimmed, if necessary)?
As long as your 1.25D M*g is tri bored and both terminal of holder make good contact to switch and tail spring, then it's possible.
-------------------------
Could you please measure for me the total diameter with the batteries loaded?
Above battery holder loaded with 3x16650 cells will fit in 36.5mm inside diameter barrel.
M6 battery barrel ID is about 37mm. So will fit perfectly.

-------------------------
DayofReckoning said:
I'm having a very hard time deciding between running either a Lumens Factory HO-M6R or their IMR-M6 lamps.
According to this, HO-M6R is 10.8 volt, 2.1 Amp bulb.
3 Keeppower 16650 can easily provide this kind of current while holding voltage as close as bulb requirements. So there is no problem at all and run time will be close to an hour.
Voltage of IMR M6 bulb is pretty close to HO-M6 and current draw is little more.
Since above batteries can still provide up to 3 Amps, therefore IMR-M6 will be brighter but not noticeable yellower.
If brightness is your main goal, IMR-M6 is your choice and of course, less run time.

-------------------------
DayofReckoning said:
When installed according to the directions in your sale thread, the light refuses to work. The only way it works is if I install the white spacer first, then the holder with the black side and spring facing down.
The only possibility for this problem is too short center spring of bulb module and does not contact to red (positive) side of battery holder connector.
By adding small piece of magnet, make the battery adapter like button top.
Some aftermarket bulb may have shorter spring than original genuine bulbs.

---------------------------
Any chance you have one more of these for sale?
There are few more left.
Please check post #1
 
Last edited:

hron61

Flashlight Enthusiast
Joined
Nov 26, 2009
Messages
1,003
Location
lakewood wa.
Re: 3x16670 Rechrgeable $urefire M6 By Fivemega

Very nice.
Will this setup work in the m6lt?
 

troller_cpf

Enlightened
Joined
Jun 7, 2009
Messages
249
Re: 3x16670 Rechrgeable $urefire M6 By Fivemega

Hello Fivemega!
With the WA1185 are the normal 16650 batteries going to work as current draw is "high" (over 3 Amps if I remember correctly) or is it necessary to use IMR 16650?

I cannot see the pictures of the holders, is it just me??

Thanks!!
 

Minimoog

Enlightened
Joined
Jan 13, 2005
Messages
771
Will there be another run on the sockets? I am using standard M6 bulbs, but they are very expensive to replace and would really like another option. This holder would be great - but I need something to hold the freely available lamps.
 

AK350X

Newly Enlightened
Joined
Nov 1, 2016
Messages
22
Sir,
Got the battery holder today! Looks great, I am very happy. Had a problem at first---the positive terminal on the body with the batteries in it is actually the negative. Might want to check the others before they go out.

Tried a message but your box was full.
I like it better with the spring and spacer on the bottom anyways...
Thanks
Josh
 

GusManB

Enlightened
Joined
Jan 24, 2016
Messages
226
GusManB $48 paypal sent for:
#3 M6 3x16650 battery holder with spacer plus US shipping
 
Last edited:

mcm308

Enlightened
Joined
May 19, 2009
Messages
359
In, I'll take number 5. Update in a little while

Edit- Paypal sent. Mcm308 in the paypal note.
Thanks!
 
Last edited:

troller_cpf

Enlightened
Joined
Jun 7, 2009
Messages
249
Hi Fivemega! Could you please measure for me the total diameter with the batteries loaded?
Thanks!
 
Top