vinte77
Enlightened
For sale, the following lights:
1) Host: Solarforce L2T, a/r lens, 10 amp switch (forward clicky) w/ copper beryllium spring, red rubber switch boot
Light Engine: silver coated copper drop-in, triple XP-L HI V2 3A 5000K LEDs on noctigon MCPCB, 10507 carclo-optics, spring bypass, DrJones H17f driver w/ bypassed spring (7135+FET, lucidrv2 programmable firmware)
WITHDRAWN WITHDRAWN WITHDRAWN
2) Host: Convoy S2+ (18350), pocket clip, a/r lens, 1288 omten switch w/ copper beryllium spring (reverse clicky)
Light Engine: triple XPG3 90+ cri LEDs on copper noctigon + jumpers soldered on a copper spacer, 10507 carclo-optic, BLF X6 driver w/ bypassed spring (FET + 7135 driver w/ Bistro programmable firmware), GITD o-ring in the head
*The light can only be run on a single cell. I'm looking to get $65 paypalled and shipped. SOLD SOLD SOLD
3) Convoy C8, XPL-Hi 5000k (neutral) on copper noctigon, Qlite driver 4.5amps w/ universal guppydrv programmable firmware 22 selectable programs), a/r lens, forward clicky switch w/ bypassed spring
*The light can only be run on a single cell. I'm looking to get $38 paypalled and shipped. SOLD SOLD SOLD
4. Astrolux S41, both 18350 and 18650 tubes, TPAD Quad DTP Copper MCPCB w/ 2 x XPL-Hi V2 1A 6500-7000k (cool white) and 2 x XPL-Hi U3 3000k 80+ cri (warm) (the leds combined makes a neutral tint beam), updated 17DDm FET+7135 driver w/ Bistro firmware, spring bypassed on both driver and switch (wire through the board method), carclo 10621 optics, 2mm thick a/r lens from fasttech
*The light can only be run on a single cell. I'm looking to get $110 paypalled and shipped. SOLD SOLD SOLD
5) Host: Seraph, a/r lens, crenulated bezel, flat bezel, omten 1288 reverse clicky switch, blue rubber switch boot
Light Engine: copper slug, 2 x XPG3 5700k 90cri leds and 2 x XPG3 3000k 80cri leds (the leds combined makes about a low 4000k tint beam, its very nice tint and easy on the eyes), updated 17DDm FET+7135 driver w/ Bistro firmware, spring bypassed on both driver and switch (wire through the board method), carclo 10621 optics
*The light can only be run on a single cell. The drop-in has been sold and the host has been withdrawn. SOLD SOLD SOLD
Please PM me if you have any questions.
1) Host: Solarforce L2T, a/r lens, 10 amp switch (forward clicky) w/ copper beryllium spring, red rubber switch boot
Light Engine: silver coated copper drop-in, triple XP-L HI V2 3A 5000K LEDs on noctigon MCPCB, 10507 carclo-optics, spring bypass, DrJones H17f driver w/ bypassed spring (7135+FET, lucidrv2 programmable firmware)
WITHDRAWN WITHDRAWN WITHDRAWN
2) Host: Convoy S2+ (18350), pocket clip, a/r lens, 1288 omten switch w/ copper beryllium spring (reverse clicky)
Light Engine: triple XPG3 90+ cri LEDs on copper noctigon + jumpers soldered on a copper spacer, 10507 carclo-optic, BLF X6 driver w/ bypassed spring (FET + 7135 driver w/ Bistro programmable firmware), GITD o-ring in the head
*The light can only be run on a single cell. I'm looking to get $65 paypalled and shipped. SOLD SOLD SOLD
3) Convoy C8, XPL-Hi 5000k (neutral) on copper noctigon, Qlite driver 4.5amps w/ universal guppydrv programmable firmware 22 selectable programs), a/r lens, forward clicky switch w/ bypassed spring
*The light can only be run on a single cell. I'm looking to get $38 paypalled and shipped. SOLD SOLD SOLD
4. Astrolux S41, both 18350 and 18650 tubes, TPAD Quad DTP Copper MCPCB w/ 2 x XPL-Hi V2 1A 6500-7000k (cool white) and 2 x XPL-Hi U3 3000k 80+ cri (warm) (the leds combined makes a neutral tint beam), updated 17DDm FET+7135 driver w/ Bistro firmware, spring bypassed on both driver and switch (wire through the board method), carclo 10621 optics, 2mm thick a/r lens from fasttech
*The light can only be run on a single cell. I'm looking to get $110 paypalled and shipped. SOLD SOLD SOLD
5) Host: Seraph, a/r lens, crenulated bezel, flat bezel, omten 1288 reverse clicky switch, blue rubber switch boot
Light Engine: copper slug, 2 x XPG3 5700k 90cri leds and 2 x XPG3 3000k 80cri leds (the leds combined makes about a low 4000k tint beam, its very nice tint and easy on the eyes), updated 17DDm FET+7135 driver w/ Bistro firmware, spring bypassed on both driver and switch (wire through the board method), carclo 10621 optics
*The light can only be run on a single cell. The drop-in has been sold and the host has been withdrawn. SOLD SOLD SOLD
Please PM me if you have any questions.
Last edited:
