As I shift my collecting focus, selling more lights...
Strong Lights Copper Rollbar with custom center section
I ordered this one custom made. Mathew Strong makes these normally with a smooth center section with a slip on cover like carbon fiber, etc....
5000k XPL HI emitters
FET + 7135 driver with BLF A6 firmware (4 or 7 modes)
Strong Lights Deep Carry Pocket Clip - Bronze anodized Ti
Mineral Glass Lens
Carclo 10507 Optic
MTN-DD17m FET driver. Custom reverse clicky for high amps the FET can provide
18350 battery tube
FET+7135 driver to get the most power and light output possible! Around 1800-2000 lumens with an 18350.
Mathew's normal knurls are not aggressive, but with the clip and the full body knurls, it was too much of a pocket eater, so I took it to the lathe and used sandpaper to knock down the knurling. Still plenty of grip, but easier on the pocket. because of how grippy it was at first, I had to really yank on the clip to get it into my pocket, and stripped out one of the clip holes, so both have been re-tapped to 6-32 Ti hex head and are holding fine now.
This is easily my brightest triple!
SOLD - $300 shipped CONUS.
Strong Lights Copper Rollbar with custom center section
I ordered this one custom made. Mathew Strong makes these normally with a smooth center section with a slip on cover like carbon fiber, etc....
5000k XPL HI emitters
FET + 7135 driver with BLF A6 firmware (4 or 7 modes)
Strong Lights Deep Carry Pocket Clip - Bronze anodized Ti
Mineral Glass Lens
Carclo 10507 Optic
MTN-DD17m FET driver. Custom reverse clicky for high amps the FET can provide
18350 battery tube
FET+7135 driver to get the most power and light output possible! Around 1800-2000 lumens with an 18350.
Mathew's normal knurls are not aggressive, but with the clip and the full body knurls, it was too much of a pocket eater, so I took it to the lathe and used sandpaper to knock down the knurling. Still plenty of grip, but easier on the pocket. because of how grippy it was at first, I had to really yank on the clip to get it into my pocket, and stripped out one of the clip holes, so both have been re-tapped to 6-32 Ti hex head and are holding fine now.
This is easily my brightest triple!
SOLD - $300 shipped CONUS.
Last edited: