Lumens Factory E-series bodies

[Mark@LF]

Here you go, Icarus.
I send you a PM, please check your mailbox.


Cheers.

Mark

[marcdilnutt]

I can't wait until these go up for sale!

Sent from my [null] using Tapatalk

[Icarus]

Here you go, Icarus.
I send you a PM, please check your mailbox.


Cheers.

Mark

Amazing! I bored one out long time ago and it came out very thin at the threads.

Any idea when the Gen2 (3-flat sides) and new Gen3 (rounded) bodies will be available?

[Mark@LF]

Any idea when the Gen2 (3-flat sides) and new Gen3 (rounded) bodies will be available?

They are in the works and should be released in March if everything is smooth.

Cheers.

Mark

[Icarus]

They are in the works and should be released in March if everything is smooth.

Cheers.

Mark

I will reply your PM soon.

[Toehead]

I may be looking to add a single cell body on an E2T-MV light. Will the E Series 1 Cell Flashlight Body, HA3 Black work or will the new versions to be released in March be better options?

[1996alnl2]

I may be looking to add a single cell body on an E2T-MV light. Will the E Series 1 Cell Flashlight Body, HA3 Black work or will the new versions to be released in March be better options?

I tried my Tactician head on a single cell 16340 and all I could get was low mode. I used multiple brands, same thing.

[Scotty321]

Is it better to order from the LF HK website or is there a US distributor that I should be purchasing from?

Any reports on the resilience of these units (E Series KL4 Style 3 Mode Head Unit (3.7V-9V), HA3 Natural/HA3 Black)? I use mine for traveling, emergencies, and personal security.

[akula88]

I tried my Tactician head on a single cell 16340 and all I could get was low mode. I used multiple brands, same thing.

I made a reply to you on this post on the Tactician thread.

[Mark@LF]

Is it better to order from the LF HK website or is there a US distributor that I should be purchasing from?

You can purchase from our Official Online Shop or our dealers in the US.
They don't carry the entire lineup, but you can always ask them to special order anything that we have.

Please go to our "Worldwide Dealers" tab for contact information.

Cheers.

Mark

[Scotty321]

You can purchase from our Official Online Shop or our dealers in the US.
They don't carry the entire lineup, but you can always ask them to special order anything that we have.

Please go to our "Worldwide Dealers" tab for contact information.

Cheers.

Mark

Thanks!

[Toehead]

Mark, thanks as well. I will check them out.

[Toehead]

I made a reply to you on this post on the Tactician thread.

You just need a shim, right?

[Roger Sully]

I have one on my EDC and also sold a few of the KL4 heads and so far have a no complaints! I am actually yet to come across anything from LF that's not quality.

[Ubermcoupe]

Here you go, Icarus.
I send you a PM, please check your mailbox.


Cheers.

Mark

Awesome! Will HA finish be an option?

[akula88]

They are in the works and should be released in March if everything is smooth.

Cheers.

Mark

Hope everything is in place. Tomorrow will be the 1st day of March. I can't wait to see the list of new releases.

[lumensbadger]

Hi Mark.

Are you contemplating to introduce an adapter that would make it possible to attach a Surefire Dual Fuel Scout head to an e series body?

That should be a quite simple task, depending on the inner / outer thread diameters of the head / light body.

[CanAm]

I'm looking at putting together a light with the two-cell bodies when the release later this month. It'll be a 2nd work light built around a Malkoff drop-in I have available. I'm hoping that some of the more knowledgeable users on this thread might be able to give some advice on two questions I have.

First, I'm debating between a Malkoff VME head and the LF P60 E head. There are one or two mentions further back on this thread of the VME not working on some of the LF E bodies, but I was hoping someone might be able to confirm that. If they do both work, I'm curious how big the size difference is and would be very appreciative of a side-by-side photo or any feedback from those who have used both.

The other question is - What's the difference between a LF Z52 clicky and a Z57/61? It seems they would be functionally identical. Am I missing something? I would like a tailcap that is lockout-capable since the light will be spending time in my work bag.

[ten5three]

MARK IS THE MAN! Excellent work and excellent customer service. Top tier, best of the best.

[euroken]

MARK IS THE MAN! Excellent work and excellent customer service. Top tier, best of the best.

Wait, are these already available?

[ten5three]

Wait, are these already available?

I don't believe they are on the site yet. Mark said he was trying to get them up posted on the site for sale. I'd send him and email and see what he can do. That's pretty much how i got these.

[thermal guy]

Oh my. Where are these??

[euroken]

Oh my. Where are these??

I asked first!

Oh the frenzy Mark can create!

[carrot]

https://share.getcloudapp.com/eDu8KxGE

The moment we’ve all been waiting for...

[thermal guy]

Still not available??

[CanAm]

Still not available??

Still not on the site. I sent an email this afternoon asking if there's a release date/how people are getting their hands on them. If they come back to me with firm details I'll share that here.

[thermal guy]

Thank you sir.

[novice]

So, is that body with the 18350 sticking out an E-head, E-tail, or C-head, E-tail? And it it's E-head, is it made out of aluminum or stainless steel? The head end looks larger, but that also looks like an E2D/E2DL bezel on the bottom one in the photo. Gee, willikers! If it's E-bezel and stainless, I so want one, with an extension.

[Edit: I got confused when blathering on earlier. Making a 2xAA configuration to be able run MN01-type lamps would be easy if it had an E-head. It would also be nice if Mark could make a 3xAA E-head, E-tail. I have Fivemega's excellent 3xAA, but it's a C-head.]

[carrot]

So, is that body with the 18350 sticking out an E-head, E-tail, or C-head, E-tail? And it it's E-head, is it made out of aluminum or stainless steel? The head end looks larger, but that also looks like an E2D/E2DL bezel on the bottom one in the photo. Gee, willikers! If it's E-bezel and stainless, I so want one, with an extension.

[Edit: I got confused when blathering on earlier. Making a 2xAA configuration to be able run MN01-type lamps would be easy if it had an E-head. It would also be nice if Mark could make a 3xAA E-head, E-tail. I have Fivemega's excellent 3xAA, but it's a C-head.]

In my photo it's all E-series, made of aluminum. E head, E tail. They're very thin. I wouldn't drive over them with a truck like I might the original E parts.

[ten5three]

So, is that body with the 18350 sticking out an E-head, E-tail, or C-head, E-tail? And it it's E-head, is it made out of aluminum or stainless steel? The head end looks larger, but that also looks like an E2D/E2DL bezel on the bottom one in the photo. Gee, willikers! If it's E-bezel and stainless, I so want one, with an extension.

[Edit: I got confused when blathering on earlier. Making a 2xAA configuration to be able run MN01-type lamps would be easy if it had an E-head. It would also be nice if Mark could make a 3xAA E-head, E-tail. I have Fivemega's excellent 3xAA, but it's a C-head.]

Mine are all E-series as well. 2007 E2D modified head, LF 18350 body, SF tailcap, stainless LF tailcap shroud.