FourSevens        
Page 6 of 6 FirstFirst 123456
Results 151 to 169 of 169

Thread: Frelux Synergy1 Passaround

  1. #151
    Moderator
    archimedes's Avatar
    Join Date
    Nov 2010
    Location
    CONUS, top left
    Posts
    13,430

    Default Re: Frelux Synergy1 Passaround

    Much appreciated
    ... is the archimedes peak

  2. #152
    Flashaholic*
    Join Date
    Jan 2015
    Location
    Ontario, Canada
    Posts
    3,463

    Default Re: Frelux Synergy1 Passaround

    Quote Originally Posted by Ozythemandias View Post
    Passaround is open indefinitely so I値l add you to the list. Passaround unit is currently en route to A-MAC

    Right now Benjamin is mainly focused on the FML and trying to get that project off the ground. I値l find out about the next preorder batch.
    Ok, thanks a bunch Oz👍. Just to confirm, you know I am in Ontario, Canada right? As long as that's not a problem I am in.

  3. #153
    Flashaholic*
    Join Date
    Jan 2015
    Location
    Ontario, Canada
    Posts
    3,463

    Default Re: Frelux Synergy1 Passaround

    Quote Originally Posted by archimedes View Post
    I asked something similar here ...

    http://www.candlepowerforums.com/vb/...=1#post5280205

    ... but have not heard back from anyone connected to Frelux

    Another point, that I think was mentioned by @Thetasigma but is really striking, is the quality of the anodizing is absolutely superb.

    I mean, I've handled literally thousands of anodized aluminum flashlights, including SureFire, Oveready, Elzetta, Lupine, etc, etc, and the quality of the Frelux finish is just unreal.

    I haven't subjected it to rough use, so no idea about the thickness or durability, but the look and feel just radiates quality.
    Thanks for the link Arch👍.

    Yeah, I hear it's nice. I am interested in the BFG models most as their anodizing looks sweet(as does the other features).

    Good to know, thanks again👍.

  4. #154
    Flashaholic*
    Join Date
    Jan 2015
    Location
    Ontario, Canada
    Posts
    3,463

    Default Re: Frelux Synergy1 Passaround

    Quote Originally Posted by Ozythemandias View Post
    I値l do my best to keep everyone here up to date and have as much advance notice as possible.
    Thank you for this👍. I have been trying to watch his FB page but, I really don't like FB and don't check it that often. I am also watching his website but, could easily miss something. This is the one I think I want...
    Last edited by Tachead; 02-23-2019 at 02:53 PM.

  5. #155

    Default Re: Frelux Synergy1 Passaround

    These look really interesting. I would love to try it out.

  6. #156
    Flashaholic* kevinm's Avatar
    Join Date
    Jun 2006
    Location
    Denverish
    Posts
    864

    Default Re: Frelux Synergy1 Passaround

    Quote Originally Posted by Ozythemandias View Post
    Passaround is open indefinitely so I値l add you to the list. Passaround unit is currently en route to A-MAC

    Right now Benjamin is mainly focused on the FML and trying to get that project off the ground. I値l find out about the next preorder batch.
    The next preorder is in 3-4 weeks.

  7. #157
    Flashaholic* kevinm's Avatar
    Join Date
    Jun 2006
    Location
    Denverish
    Posts
    864

    Default Re: Frelux Synergy1 Passaround

    If the pass around isn't full, I'd like to take a look at one.

  8. #158
    Flashaholic* Paul6ppca's Avatar
    Join Date
    Jun 2006
    Location
    RI
    Posts
    1,249

    Default Re: Frelux Synergy1 Passaround

    Please add me to the list for the pass around! I am very curious to see how it fits in my hand.

  9. #159

    Default Re: Frelux Synergy1 Passaround

    I neglected this for a couple weeks, got busy with some personal projects but we're back on track! TRDMatrix just received the unit from AndrewC (we had to skip him then come back), and it'll be off to the next participant next week.

    Updated the list with the last few commentators, thanks guys and sorry for the lapse!

  10. #160
    Flashaholic* Nichia!'s Avatar
    Join Date
    Dec 2016
    Location
    Nowhere
    Posts
    1,956

    Default Re: Frelux Synergy1 Passaround

    Am in for a full copper and Titanium lights

  11. #161
    Flashaholic*
    Join Date
    Nov 2012
    Location
    Tallahassee, FL.
    Posts
    1,433

    Default Re: Frelux Synergy1 Passaround

    Quote Originally Posted by Nichia! View Post
    Am in for a full copper and Titanium lights
    This design won't work with raw head and tails. I saw a V2 mentioned that may work for that.

  12. #162

    Default Re: Frelux Synergy1 Passaround

    Quote Originally Posted by eraursls1984 View Post
    This design won't work with raw head and tails. I saw a V2 mentioned that may work for that.
    Correct, although I believe that is referencing the Synergy2, an entirely new model. The Synergy1 is pretty much in it's final design and won't be revised any more, if at all (AFAIK).

  13. #163

    Default Re: Frelux Synergy1 Passaround

    Passaround continues and is en-route to Jon L

  14. #164

    Default Re: Frelux Synergy1 Passaround

    I would like to share my little experience, if this is out of place - then show me please where to re-put this information.


    Frelux Sinergy1, his bought by my friend for himself and It was in transit around me today.


    This is the version with Nichia 219C. Nice flashlight in hand.


    It's terrible in terms of mounting the back cover - in the dark if need be, everything can scatter in all directions - clip left, gear wheel to the right (on the video, the gear wheel flew to the bottom shelf, the clip dropped it, it is all its spring) + you can insert the batteries in the wrong direction and not understand it until the moment when you need to turn on the light and it will not light))


    As correctly noted before, it is advisable to add some element that will not allow it to crumble when changing the battery and show an unambiguous installation of the back cover.


    Hue good, 1 in 1 with my copy of Convoy, 219С 4000K, although there is a slight irregularity - the edges of the central spot of the beam are slightly brighter than the middle of central spot. Maybe if there was a mixing TIR here, it would be much better. Or lower the diode light surface a little bit below the lower edge of the reflector.


    Here, management is the same as in Eagletac D3A, except that there are 3 modes (D3A have more)


    There is a loud enough background sound, it is better to turn down the volume in advance.
    The first moments are a completely different flashlight and you do not need to pay attention to this.



    And it looks like old derringer pistol on one of the methods of use, conveniently !!

    [the main thing is that you are not shot, thinking that you are holding a real derringer]




    Due to the "back action" button, it can be kept at the neck / eye as a tactical flashlight one and switch modes by slightly touching the button with the little finger.

    As an option, you can reverse the pin and connect it to the toothed wheel and cover, but then you need another way of attaching the clip

    Last edited by desert.snake; 07-03-2019 at 03:03 PM.

  15. #165
    Flashaholic*
    Join Date
    Jan 2015
    Location
    Ontario, Canada
    Posts
    3,463

    Default Re: Frelux Synergy1 Passaround

    Quote Originally Posted by Ozythemandias View Post
    Passaround continues and is en-route to Jon L
    Any updates OZ? Still looking forward to checking out my first Frelux. Thanks again👍.

    Sent from my SM-G935W8 using Tapatalk

  16. #166

    Default Re: Frelux Synergy1 Passaround

    Does the new driver have mode memory?

  17. #167

    Default Re: Frelux Synergy1 Passaround

    Quote Originally Posted by mk2rocco View Post
    Does the new driver have mode memory?
    No mode memory. I checked in with Frelux on Instagram.

    Sent from my Pixel 3 using Tapatalk

  18. #168
    Flashaholic* Paul6ppca's Avatar
    Join Date
    Jun 2006
    Location
    RI
    Posts
    1,249

    Default Re: Frelux Synergy1 Passaround

    Where are we on the pass around list?
    Thx

  19. #169
    Flashaholic* Paul6ppca's Avatar
    Join Date
    Jun 2006
    Location
    RI
    Posts
    1,249

    Default Re: Frelux Synergy1 Passaround

    Any updates? Just curious.

Page 6 of 6 FirstFirst 123456

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •