Klarus        
Results 1 to 7 of 7

Thread: FS. A poor man's 'Gizmo ( ? ) ( Copperhead SOLD)

  1. #1

    Default FS. A poor man's 'Gizmo ( ? ) ( Copperhead SOLD)

    First up, a No-Name Stainless Steel flashlight with DIY setup.
    Features the following:

    • SS host with deep OP reflector and reverse clicky switch.
    • XM-L2 T5-5C1 4000K LED on copper mPCB.
    • Mtn Electronics 17mm FET Direct Drive driver with 60 second Turbo step-down (ie: drops from 100% to 50% after 60 seconds).
    • Levels: 2%, 5%, 20%, 50%, 100%
    • Fits a 65mm unprotected 18650 battery. Switch can be unscrewed a bit to fit a longer protected cell but the button will stick out the back and it won't be able to tailstand.

    This is a decent no-name host. Solid heavy feel in the hand, 8 oz with battery. Nice beam with a decent throw profile. Measured ~3Amps at the tailcap on high so even though the driver is Direct Drive via FET it's not going pull too much current or heat up a lot.
    Note: Switch can be a bit finicky, but never bothered me enough to mess with it. Always works.

    Bought from fellow CPF’er.
    Asking $85 delivered.

    2nd up is a Copperhead made by CPF’s own “Schizeckinosy”. (SOLD)
    * Smooth Bezel
    * Optic-FOV 45*
    * XML2 5K
    * KD 3050 50ma low
    * L-M-H No Memory
    * Foward McClickie Cap
    * Completely potted, heavy duty wiring, damn near indestructible.
    * Designed for so you can add an extra 123 tube for fitting a 18650, so just a 123 battery is a bit loose, I used a rolled up $1 bill as sleeve. (not included..LOL)
    I bought this from the original CPF owner. Has a very nice patina built up, easily removed with Ketchup or lemon juice. Small ding in copper edge where a bezel would be, but no bezel on this light. Visible in second photo. Doesn’t have any effect, very small.
    Asking $60 delivered. (SOLD)

    IMG_9078.jpgIMG_9079.jpgIMG_9080.jpg

    First “I’ll take it” in post, snags the light. Followed by prompt payment please.

    Paypal G&S, I eat the fees.
    Shipping free to CONUS via USPS.
    PM any questions.
    Thanks for looking.
    Attached Images Attached Images
    Last edited by HKdude; 12-10-2018 at 02:31 PM.

  2. #2
    Flashaholic
    Join Date
    Apr 2010
    Location
    Wollongong, Australia
    Posts
    302

    Default Re: FS. A poor man's 'Gizmo ( ? ) and a Copperhead that doesn't bite....

    Ill take the poor mans gizmo if you dont mind shipping to Australia, just let me know total with shipping and I will paypal it.

  3. #3

    Default Re: FS. A poor man's 'Gizmo ( ? ) and a Copperhead that doesn't bite....

    Sorry man, I don't ship Internationally.

    Appreciate the interest.

  4. #4
    Enlightened
    Join Date
    Jul 2016
    Location
    Virginia
    Posts
    32

    Default Re: FS. A poor man's 'Gizmo ( ? ) and a Copperhead that doesn't bite....

    I will take the copperhead.

  5. #5

    Default Re: FS. A poor man's 'Gizmo ( ? ) and a Copperhead that doesn't bite....

    You got it, PP address sent via PM.

  6. #6

    Default Re: FS. A poor man's 'Gizmo ( ? ) and a Copperhead that doesn't bite....

    The Copperhead is on it's way to "Msf", thanks for the purchase Mark.

  7. #7
    Enlightened
    Join Date
    Jul 2016
    Location
    Virginia
    Posts
    32

    Default Re: FS. A poor man's 'Gizmo ( ? ) and a Copperhead that doesn't bite....

    Just received the Copperhead. Very nice light and a very pleasant transaction with HKdude.
    Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •