DD+7135 drivers:
12/15mm
new for 2 S eliminating AMC7135 dedicated indicator resistor and pad
2 channel (Narsil with indicator)
3 channel (mainly Bistro HD)
Oslon Black
17-19mm
20mm
new 1S/2S combination from my LX driver
C8F 21700
Oslon Black flat with P-FET
20,5mm Astrolux S42
21mm (discontinued)
Skilhunt H03
20-22mm
(discontinued)
new version with 1S 3 channel AMC and 2S dual MOSFET
24-30mm
v3.1 with a little bugfix (1S only now, 2S new one)
new 2S version
without AMC for 2S, also added two switchLED support
Programming port (under development curently have v2.0 and 3.0 available)
28-33.5mm
small current FET 1-4S
38,5mm Cuoroi D01
42mm
TN42 2S/2P DD (discontinued AMC problem at 2S)
46mm
2S/2P MT03
new enhanced version no more AMC7135
3 step filtering to get the rininging from PWM under control
47,5mm
Astrolux MF01 (discontinues AMC problem at 2S)
BLF Q8
Buck drivers:
Input 6 to 25V
Output 6-20V 1-8A as requested
The input and output voltage difference defines the switching frequency so they get set for your light individually
I have calculations for various inputs/outputs
20mm
for Convoy L2 or similar
22mm
new more efficient MOSFET and minor changes
23mm
for Klarus XT11/12GT running 2 18350s for Oslon 1mm & 2mm² or other 3V LED including Black flat
30mm
new for Convoy L6 more efficient MOSFET
30-33.5mm
Lumintop SD75 8A 2-4S buck
42mm
TN42 XHP35
new version up to 8A also for TN40S mods with XHP35s
Niwalker BK-FA30 v2
47,5mm
MF02 XHP35
new version MF02/04S 12V up to 8A
46 mm MT07 / MT07S / MT09R(XHP35)
new version up to 8A
Dual Buck 46/47,5mm 4S/1P or 2S/2P
MF01 v2 3S 13A dual Buck driver with new MOSFET and now single sided
should fit MT03 as well trimmed to 46mm
Acebeam K65 latest gen with programming port(under development waiting on boards)
BLF GigaThrower driver
XHP70.2 or Oslon Black Flat up to 8A
as the marketplace needs to pay I can not start any sale here on CPF
12/15mm
new for 2 S eliminating AMC7135 dedicated indicator resistor and pad
2 channel (Narsil with indicator)
3 channel (mainly Bistro HD)
Oslon Black
17-19mm
20mm
new 1S/2S combination from my LX driver
C8F 21700
Oslon Black flat with P-FET
20,5mm Astrolux S42
21mm (discontinued)
Skilhunt H03
20-22mm
(discontinued)
new version with 1S 3 channel AMC and 2S dual MOSFET
24-30mm
v3.1 with a little bugfix (1S only now, 2S new one)
new 2S version
without AMC for 2S, also added two switchLED support
Programming port (under development curently have v2.0 and 3.0 available)
28-33.5mm
small current FET 1-4S
38,5mm Cuoroi D01
42mm
TN42 2S/2P DD (discontinued AMC problem at 2S)
46mm
2S/2P MT03
new enhanced version no more AMC7135
3 step filtering to get the rininging from PWM under control
47,5mm
Astrolux MF01 (discontinues AMC problem at 2S)
BLF Q8
Buck drivers:
Input 6 to 25V
Output 6-20V 1-8A as requested
The input and output voltage difference defines the switching frequency so they get set for your light individually
I have calculations for various inputs/outputs
20mm
for Convoy L2 or similar
22mm
new more efficient MOSFET and minor changes
23mm
for Klarus XT11/12GT running 2 18350s for Oslon 1mm & 2mm² or other 3V LED including Black flat
30mm
new for Convoy L6 more efficient MOSFET
30-33.5mm
Lumintop SD75 8A 2-4S buck
42mm
TN42 XHP35
new version up to 8A also for TN40S mods with XHP35s
Niwalker BK-FA30 v2
47,5mm
MF02 XHP35
new version MF02/04S 12V up to 8A
46 mm MT07 / MT07S / MT09R(XHP35)
new version up to 8A
Dual Buck 46/47,5mm 4S/1P or 2S/2P
MF01 v2 3S 13A dual Buck driver with new MOSFET and now single sided
should fit MT03 as well trimmed to 46mm
Acebeam K65 latest gen with programming port(under development waiting on boards)
BLF GigaThrower driver
XHP70.2 or Oslon Black Flat up to 8A
as the marketplace needs to pay I can not start any sale here on CPF
Last edited: