Klarus        
Results 1 to 8 of 8

Thread: Looking for single mode 3 amp driver

  1. #1
    Flashaholic* Nitroz's Avatar
    Join Date
    Jul 2004
    Location
    Monroe
    Posts
    3,131

    Default Looking for single mode 3 amp driver

    I need a single mode 3 amp driver with no low voltage protection.

    Thanks!

  2. #2
    Flashaholic* id30209's Avatar
    Join Date
    Mar 2008
    Location
    Europe
    Posts
    982

    Default Re: Looking for single mode 3 amp driver

    http://www.international.mtnelectron...&product_id=52

    In options you can choose at the bottom Single mode...

  3. #3
    *Flashaholic* ChrisGarrett's Avatar
    Join Date
    Feb 2012
    Location
    Miami, Florida
    Posts
    5,219

    Default Re: Looking for single mode 3 amp driver

    Quote Originally Posted by Nitroz View Post
    I need a single mode 3 amp driver with no low voltage protection.

    Thanks!
    I don't know Bud, as I'm only an English Lit major, but here you go:

    http://www.mtnelectronics.com/index....&product_id=52

    I don't see an absence of LVP, but good luck.

    If this place fails, check over on BLF, as those guys are nuts.

    Chris
    Convoy: S2, S2+, M1, M2, Fenix: P1D, PD32, HL30, ET: D25C Ti, SF: 6P, ZL: SC-600, Klarus: P2A, Jetbeam: BA-20, Icon: Rogue 1, L3: L10, Xeno: E03, ShiningBeam: I-Mini, Olight: i3s, SWM: D40A, M11R, V11R, Maglite: 6Ds, MMs, Solitaires, LaCrosse BC-700, Maha C-9000, XTAR VP2, MP1S, XP1, MC1+, WP2 II, NiteCore i4, v2.

  4. #4

    Default Re: Looking for single mode 3 amp driver

    what kind of driver are you looking for? linear, boos, buck?

    if it's linear, than you need 8amc driver with mo mc. however all amc drivers have low voltage cut off, not protection, they just can't work below 2,8v iirc.

    if you know what you doing you can cut few lines on circuit board of 5 mode amc driver and disable mc and modes, but i do not know which lines to cut

  5. #5
    Flashaholic* Nitroz's Avatar
    Join Date
    Jul 2004
    Location
    Monroe
    Posts
    3,131

    Default Re: Looking for single mode 3 amp driver

    I tried a qlite and with a Surefire two stage tail cap it triggers the lvp.

  6. #6
    Flashaholic* Nitroz's Avatar
    Join Date
    Jul 2004
    Location
    Monroe
    Posts
    3,131

    Default Re: Looking for single mode 3 amp driver

    Quote Originally Posted by alpg88 View Post
    what kind of driver are you looking for? linear, boos, buck?

    if it's linear, than you need 8amc driver with mo mc. however all amc drivers have low voltage cut off, not protection, they just can't work below 2,8v iirc.

    if you know what you doing you can cut few lines on circuit board of 5 mode amc driver and disable mc and modes, but i do not know which lines to cut
    Thanks! alpg88! I think that should do it. It's nice that it does not have a controller as my application does not need it.

  7. #7

    Default Re: Looking for single mode 3 amp driver

    Quote Originally Posted by Nitroz View Post
    Thanks! alpg88! I think that should do it. It's nice that it does not have a controller as my application does not need it.
    your welcome.
    however keep in mind, voltage cut off is build into amc chips themselves, not mc.

  8. #8
    Flashaholic* Nitroz's Avatar
    Join Date
    Jul 2004
    Location
    Monroe
    Posts
    3,131

    Default Re: Looking for single mode 3 amp driver

    Quote Originally Posted by alpg88 View Post
    your welcome.
    however keep in mind, voltage cut off is build into amc chips themselves, not mc.
    Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •