EDIT: Important update. On 4/5/19 the output and CD (range) testing I did were flawed. The battery in my light meter was very low and I did not catch it until now. This caused the readings I took to be significantly off. After changing the battery in the meter, double checking calibration and retesting the lights I am posting the updated lumen outputs below. I do not have updated CD testing at this time, however because of the meter issue it is likely that those readings were high also. I am unable to change the title or original description in my Ebay Auction listist for the lights, but I added this information to the "edit" section. I greatly apologize for the mistake and any inconvenience this has caused.
Light................Mistake Lumens.............Revised Lumens.......................%Out of wack
Factory C8+.........................998..................................818....................................19.80%
C8+ Mosfet........................1688................................1216....................................32.50%
50.2 Mosfet........................3441................................2991....................................11.00%
50.2 Mos dedome..............2943.................................2581...................................13.10%
Again I am very sorry for any confusion or trouble this has caused!
Matt
Hi all,
The awesomeness of an XHP50.2 is now available in 3 volt, so I thought I'd build out a few lights. This LED is amazing!
What would you like to see this emitter in?
Light................Mistake Lumens.............Revised Lumens.......................%Out of wack
Factory C8+.........................998..................................818....................................19.80%
C8+ Mosfet........................1688................................1216....................................32.50%
50.2 Mosfet........................3441................................2991....................................11.00%
50.2 Mos dedome..............2943.................................2581...................................13.10%
Again I am very sorry for any confusion or trouble this has caused!
Matt
Hi all,
The awesomeness of an XHP50.2 is now available in 3 volt, so I thought I'd build out a few lights. This LED is amazing!
What would you like to see this emitter in?
Last edited: