Jetbeam        
Results 1 to 2 of 2

Thread: fixing a Jetbeam SF-R28 side switch

  1. #1
    Unenlightened
    Join Date
    Dec 2011
    Posts
    2

    Default fixing a Jetbeam SF-R28 side switch

    The side switch on my Jetbeam SF-R28 came off tonight. I can send a picture if that helps, but this is the gray rubber mode selector switch on the side of the light.
    When I try to push it back in place, it doesn't seat evenly and no matter how hard I push it, it cannot actually actuate the mode selector. I can poke the mode selector with a pencil and change the mode, so nothing electronic is broken.

    Has anybody had this problem? How can I get the side switch to work again? It must be something simple I'm not thinking of.

  2. #2
    Unenlightened
    Join Date
    Dec 2011
    Posts
    2

    Default Re: fixing a Jetbeam SF-R28 side switch

    It's weird because on the back of the gray rubber buttion, the little knob has three radiating protrusions (like a radiation symbol), but there is nothing to receive them. Maybe I am missing a tiny part that got lost?

    I have tried for a literal hour and the button won't properly seat back where it came from. This ain't my model, but that's the gray button the gloved thumb is on.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •