- Joined
- Feb 2, 2006
- Messages
- 1,151
FS Custom OFC heatsink for MagAA (incandescent version) LED setups
De-facto standard for LED module builds for such setup
Faithful reproduction (clone) based on original run
Late 2018 production (produced in Taiwan)
Previous runs
http://www.candlepowerforums.com/vb/showthread.php?216656-FS-OFC-heatsink-for-minimagAA (original run from original member)
http://www.candlepowerforums.com/vb/showthread.php?287126-FS-Custom-MagAA-OFC-heatsink (cloned version)
Features and highlights:
- Precision CNC-machined based on original product's size specifications
- Slightly modified tower threads (extended towards base) for guaranteed fitment (esp. clamping) onto MagAA's body tube
- Compatible with most driver/converter boards measuring 0.55" (~14mm) in diameter and less than 6mm in total height (eg. Sandwich Shoppe converter boards)
- Compatible with small-footprint LED emitters soldered on dedicated MCPCBs (eg. Cree XPG2/3, Nichia 219b/c/d, Nichia 319a/b etc.)
- Requires low-height optics measuring less than 10mm for effective head fitment onto body (eg. Khatod collimator optics measuring ~9.9mm in height or less, cut-down McGizmo reflector McR18/S)
Compatibility:
- MagAA incandescent models only (stock 2AA or custom cut-down body variant)
- NOT compatible with any MagAA LED model
- Requires tailcap switch for system operability (esp. Kroll switch)
Notes:
- Proper and precision DIY skills required for building light modules
- A side nub opening may need to to be made to accommodate driver boards whose coil inductors are placed at the very edge of the PCB (buyer assumes all responsibility in making such opening)
Pricing: $23.50 each
Includes main heatsink, retainer collar ring, one GND screw (installed on base)
Shipping: Registered International only (ETA 7-16 days)
$4.50 for first unit; +$1.00 for each additional unit
Currently 19 units available
Only PayPal payments accepted (please PM for payment info)
Please reply to thread for any questions.
Thanks for looking
De-facto standard for LED module builds for such setup
Faithful reproduction (clone) based on original run
Late 2018 production (produced in Taiwan)
Previous runs
http://www.candlepowerforums.com/vb/showthread.php?216656-FS-OFC-heatsink-for-minimagAA (original run from original member)
http://www.candlepowerforums.com/vb/showthread.php?287126-FS-Custom-MagAA-OFC-heatsink (cloned version)
Features and highlights:
- Precision CNC-machined based on original product's size specifications
- Slightly modified tower threads (extended towards base) for guaranteed fitment (esp. clamping) onto MagAA's body tube
- Compatible with most driver/converter boards measuring 0.55" (~14mm) in diameter and less than 6mm in total height (eg. Sandwich Shoppe converter boards)
- Compatible with small-footprint LED emitters soldered on dedicated MCPCBs (eg. Cree XPG2/3, Nichia 219b/c/d, Nichia 319a/b etc.)
- Requires low-height optics measuring less than 10mm for effective head fitment onto body (eg. Khatod collimator optics measuring ~9.9mm in height or less, cut-down McGizmo reflector McR18/S)
Compatibility:
- MagAA incandescent models only (stock 2AA or custom cut-down body variant)
- NOT compatible with any MagAA LED model
- Requires tailcap switch for system operability (esp. Kroll switch)
Notes:
- Proper and precision DIY skills required for building light modules
- A side nub opening may need to to be made to accommodate driver boards whose coil inductors are placed at the very edge of the PCB (buyer assumes all responsibility in making such opening)
Pricing: $23.50 each
Includes main heatsink, retainer collar ring, one GND screw (installed on base)
Shipping: Registered International only (ETA 7-16 days)
$4.50 for first unit; +$1.00 for each additional unit
Currently 19 units available
Only PayPal payments accepted (please PM for payment info)
Please reply to thread for any questions.
Thanks for looking
