TyTEK
Newly Enlightened
- Joined
- Jul 6, 2012
- Messages
- 146
Got some safe queens for sale that just never get used and I figure posting in a single thread is easiest. I've got these cross posted on another forum.
I ship via USPS priority mail within the USA. Payment via PayPal Goods and Services.
1) First up is an old school McGizmo Sundrop. It's hosting a 3S driver with a Nichia 083 LED. Not a lot of lumens, but superb color rendering. This one was sold to me as unused, and it looks unused. I thought I'd give this one a shot, but I prefer my Haikus. Asking - $375 -> (Sold and Shipped!)
2) Next up is a like new Oveready Unified P20 body with ZeroRez twisty switch and Malkoff M61 light engine. Perfect for the discriminating user that hates clickies or just likes mechanical robustness of a twisty. Plus the body will accept any P60 light engine you like. Asking - $150 -> $130 -> (Sold to Jimmyboots -> shipped!)
3) Next, I've got a couple old school McGizmo 3S light engines that were hardly used. I believe one is a first gen XPG (looks cool white to me), and I believe the other is an XR-E (also looks cool white). I don't know specifics on output or temperature though. Asking - $40 for both or included with the Sundrop above. -> (Sold and Shipped!)
4) Next up, Malkoff MD1 modification with an Oveready DPC clicky tailcap, custom heatsink and retaining ring, and TorchLAB v5 Triple P60 drop in. The body was cut down from a larger Malkoff tube and re-threaded by Martin White. He also made the custom ring and heat sink shroud for the v5 drop in. These parts have only been assembled by me and power tested, but never used or carried. Asking - $350 -> (Sold to Nimitz68 -> shipped)
Notes: The drop in specs are XP-L Hi 4200K primaries with a Red (640nm) secondary. Drop in is rated for 32W and 3500 lumen. This thing is a little bit chunkier than an Oveready B.O.S.S. and functions just like one too, optical programming and all.
With the Malkoff head and custom heat sink, I've been able to run this exact setup on the highest levels for quite a bit longer than a B.O.S.S. flashlight at similar settings just because of the additional aluminum mass. Plus, if you've already got other Malkoff bodies, the drop in can be used with them as well.
This body will accept 18350 batteries. You will need a high current drain IMR battery to run the v5 drop in at higher brightness levels. I have been using the Keeppower IMR18350 1200mAh High Discharge Flat Top with this exact engine with good success. I believe Efest and Vapcell offer similar cells that will work. They all run about $5 to $6 a pop.
5) Brand new Malkoff MD2 HOT with Tricap. Asking - $125 -> (Sold to dorikinhajime -> shipped)
6) Brand new Malkoff Bodyguard (v1) with stainless steel crenelated bezel. The LED is a Cool White (6200K) Cree XP-L. Asking - $115 -> (Sold to johnv -> shipped)
7) Like new Malkoff MDC (16650 tube). Has one small chip in the anodizing near the bezel. I seem to remember it coming to me that way. The LED is the cool white option. Asking - $100 -> $90
8) Malkoff MD1.5 tube. This was cut down from a larger MD4 tube and re-threaded by Martin White. Should accommodate an 18500 cell with a regular Malkoff clicky switch. Or it can be used with an Oveready ZRS twisty tailcap to accommodate an 18650. Asking - $55 -> (SOLD on another forum)
9) New Oveready ZRS (ZeroRes Shorty) tail switch with clip. Asking - $75 -> (SOLD on another forum)
10) Brand new EDCPlus X60L3v2 Drop in. Triple XP-G2 S4, Cool White. Three modes with a max OTF of ~910 lumens. Asking - $45 -> $40 (SPF to jkid1911 -> shipped)
11) Excellent condition EDCPlus X60L3v2 Drop-in and Malkoff Head. Triple XP-G2 S4, Cool White. Three modes with a max OTF of ~910 lumens. I managed to press the light engine into a Malkoff retaining ring so that it fits in the head along with a lens and gasket and can still be screwed down onto an MD2 body. Used for over a year of EDC. It was replaced by my v5 triple setups so it needs a new home. Asking - $50 -> (sold to aginthelaw -> shipped)
12) Brand new Malkoff Un-shrouded MDC 18650 body. Asking - $60 -> (sold to aginthelaw -> shipped)
13) Brand new Foursevens Mini MKII Turbo Stainless Steel. Asking - $50 -> (sold to id30209 -> shipped)
14) Like new Aonic Triple LED Flashlight (1st edition) 18350 Brushed Aluminum Body with XP-L HI 5K emitters. Took it to work once and started a small fire in my coworkers trash can. Haven't used it since. A17DD-L FET+1 driver with a max Turbo of 2800 lumen. Asking - $75 -> (Sold to jal -> shipped!)
15) Like new Aonic Triple LED Flashlight (1st edition) 18650 Raw Aluminum Body with Nichia 219c emitters. Carried it once, haven't used since. A17DD-L FET+1 driver with a max Turbo of 2000 lumen. Asking - $70 -> (sold to aginthelaw -> shipped)
I ship via USPS priority mail within the USA. Payment via PayPal Goods and Services.
1) First up is an old school McGizmo Sundrop. It's hosting a 3S driver with a Nichia 083 LED. Not a lot of lumens, but superb color rendering. This one was sold to me as unused, and it looks unused. I thought I'd give this one a shot, but I prefer my Haikus. Asking - $375 -> (Sold and Shipped!)
2) Next up is a like new Oveready Unified P20 body with ZeroRez twisty switch and Malkoff M61 light engine. Perfect for the discriminating user that hates clickies or just likes mechanical robustness of a twisty. Plus the body will accept any P60 light engine you like. Asking - $150 -> $130 -> (Sold to Jimmyboots -> shipped!)
3) Next, I've got a couple old school McGizmo 3S light engines that were hardly used. I believe one is a first gen XPG (looks cool white to me), and I believe the other is an XR-E (also looks cool white). I don't know specifics on output or temperature though. Asking - $40 for both or included with the Sundrop above. -> (Sold and Shipped!)
4) Next up, Malkoff MD1 modification with an Oveready DPC clicky tailcap, custom heatsink and retaining ring, and TorchLAB v5 Triple P60 drop in. The body was cut down from a larger Malkoff tube and re-threaded by Martin White. He also made the custom ring and heat sink shroud for the v5 drop in. These parts have only been assembled by me and power tested, but never used or carried. Asking - $350 -> (Sold to Nimitz68 -> shipped)
Notes: The drop in specs are XP-L Hi 4200K primaries with a Red (640nm) secondary. Drop in is rated for 32W and 3500 lumen. This thing is a little bit chunkier than an Oveready B.O.S.S. and functions just like one too, optical programming and all.
With the Malkoff head and custom heat sink, I've been able to run this exact setup on the highest levels for quite a bit longer than a B.O.S.S. flashlight at similar settings just because of the additional aluminum mass. Plus, if you've already got other Malkoff bodies, the drop in can be used with them as well.
This body will accept 18350 batteries. You will need a high current drain IMR battery to run the v5 drop in at higher brightness levels. I have been using the Keeppower IMR18350 1200mAh High Discharge Flat Top with this exact engine with good success. I believe Efest and Vapcell offer similar cells that will work. They all run about $5 to $6 a pop.
5) Brand new Malkoff MD2 HOT with Tricap. Asking - $125 -> (Sold to dorikinhajime -> shipped)
6) Brand new Malkoff Bodyguard (v1) with stainless steel crenelated bezel. The LED is a Cool White (6200K) Cree XP-L. Asking - $115 -> (Sold to johnv -> shipped)
7) Like new Malkoff MDC (16650 tube). Has one small chip in the anodizing near the bezel. I seem to remember it coming to me that way. The LED is the cool white option. Asking - $100 -> $90
8) Malkoff MD1.5 tube. This was cut down from a larger MD4 tube and re-threaded by Martin White. Should accommodate an 18500 cell with a regular Malkoff clicky switch. Or it can be used with an Oveready ZRS twisty tailcap to accommodate an 18650. Asking - $55 -> (SOLD on another forum)
9) New Oveready ZRS (ZeroRes Shorty) tail switch with clip. Asking - $75 -> (SOLD on another forum)
10) Brand new EDCPlus X60L3v2 Drop in. Triple XP-G2 S4, Cool White. Three modes with a max OTF of ~910 lumens. Asking - $45 -> $40 (SPF to jkid1911 -> shipped)
11) Excellent condition EDCPlus X60L3v2 Drop-in and Malkoff Head. Triple XP-G2 S4, Cool White. Three modes with a max OTF of ~910 lumens. I managed to press the light engine into a Malkoff retaining ring so that it fits in the head along with a lens and gasket and can still be screwed down onto an MD2 body. Used for over a year of EDC. It was replaced by my v5 triple setups so it needs a new home. Asking - $50 -> (sold to aginthelaw -> shipped)
12) Brand new Malkoff Un-shrouded MDC 18650 body. Asking - $60 -> (sold to aginthelaw -> shipped)
13) Brand new Foursevens Mini MKII Turbo Stainless Steel. Asking - $50 -> (sold to id30209 -> shipped)
14) Like new Aonic Triple LED Flashlight (1st edition) 18350 Brushed Aluminum Body with XP-L HI 5K emitters. Took it to work once and started a small fire in my coworkers trash can. Haven't used it since. A17DD-L FET+1 driver with a max Turbo of 2800 lumen. Asking - $75 -> (Sold to jal -> shipped!)
15) Like new Aonic Triple LED Flashlight (1st edition) 18650 Raw Aluminum Body with Nichia 219c emitters. Carried it once, haven't used since. A17DD-L FET+1 driver with a max Turbo of 2000 lumen. Asking - $70 -> (sold to aginthelaw -> shipped)
Last edited: