The Fenix-Store        
Results 1 to 11 of 11

Thread: FS: Mockbug. First small series run

  1. #1

    Default FS: Mockbug. First small series run

    Here goes…

    It is with no small amount of personal satisfaction that i’m offering the first and potentially only batch of Mockbug lights up for sale.
    In all i have the following lights available:






    #01 Mockbug Steel Light with nickel finish. / Reserved egginator1
    #02 Mockbug Steel Light with nickel finish. / Reserved Anonymous
    #03 Mockbug Steel Light with nickel finish. / Reserved badtziscool
    #04 Mockbug Steel Light with nickel finish. / Reserved jal
    #05 Mockbug Steel Light with nickel finish.
    #06 Mockbug Steel Light with nickel finish.
    #07 Mockbug Steel Light with nickel finish.
    #08 Mockbug Steel Light with nickel finish.
    #09 Mockbug Steel Light with nickel finish.
    #10 Mockbug Steel Light with nickel finish. / Reserved TailoredEDC
    #11 Mockbug Steel Light with black Oxide “Post Apocalyptic” finish. / Reserved Anonymous
    #12 Mockbug Steel Light with black Oxide “Post Apocalyptic” finish. / Reserved Zandar

    There’s a thread in the “Homemade and Modified Flashlights Discussion” https://www.candlepowerforums.com/vb...ashlight-build section going over various design iterations as well as my motivation and parts of the actual build process.

    Disclaimer:
    Please keep in mind that these are made in a home shop and are not PERFECT. They are made to the best of my ability and are in my mind pretty good but what you see in the pictures is what you get.
    In the interest of full disclosure there is in my mind a single caveat. Not all lights are capable of reversing the body tube between the head and the tail-cap. This comes down to holding too tight tolerances on the threads prior to Nickel plating. It will not cause any issues in use but i believe you should be aware before buying.

    Mockbug Short (MBS) Mule:
    - Dimensions: L 69mm / 2,71 Inches – Maximum OD 25,8mm / 1,01 Inch – Body 22,2mm / 0.87 Inch.
    - Weight (not including battery) xx Grams
    - Body is nickel plated steel.
    - It takes a single RCR123 / 16340 rechargeable Li-Ion cell.
    - Reverse Clickie.
    - Nichia NVSL219C R9050 D240 4000k CRI92 LED
    - Hardware modified Nanjg AK47a driver.
    - Default firmware is 3 mode with memory and battery protection on. (moonlight, 30%, 100%)
    - Single 7135 moonlight mode. (means it is brought as low as it can go)
    - Maximum output 700ma which should provide in the region of 250 Lumens in this configuration. (this is not confirmed as i have no means of measuring it.)
    - Anti reflection coated mineral glass.
    - Synthetic rubber boot.

    Nickel plated finish:
    - Nickel plated interior and exterior for maximum environmental protection.

    Post apocalyptic finish:
    - Nickel plated interior, Super Crusty black oxide exterior (requires occasional oiling).
    - Durability of this finish will be quite a bit less than the Nickel finish but wear and patina should suit the finish nicely.

    Optional custom firmware:
    - Modes 1-5 (Specify modes as percentage)
    - Moonlight enable yes/no (deducts from modes)
    - Memory on/off
    - Battery Monitor on/off
    There’s no need to do Turbo as the light will run 700ma all day long. It will be uncomfortably hot but it will run.
    (The firmware is written by JonnyC with a few modifications by me)

    Pricing:
    Mockbug standard USD 220.-
    Customized firmware + USD 15.-


    Shipping:
    -Shipping from my part of Europe to the US is an issue. E.g. Costly.
    -I will be changing you what it costs me to ship. Nothing more nothing less.
    -Depending on takers, firmware options and destinations a waiting period of a couple of weeks must be expected prior to shipping as bulk shipping is paramount to pricing.

    US:
    Tracked non-insured USPS USD 24.-
    (1-3 Weeks estimated)

    Tracked insured UPS USD 54.-
    (1 Week estimated)
    Europe:
    Mainland Europe will be less than US shipping. Once i receive your shipping details i will return with an update cost.

    An unconditional “I’ll take it” commits both you and me.
    In addition please specify if you’d like customized firmware.
    This being my first series run going up for sale i must admit i’m excited to see how this goes.
    Should you have any questions please don’t hesitate to ask. I’ll do my very best to reply within a reasonable time frame.

    Happy shopping
    /ÆR
    Last edited by AER-Lights; 08-17-2019 at 02:11 AM. Reason: adding pics.

  2. #2

    Default Re: WTS Mockbug. First small series run

    Those are very cool..

    Sent from my SM-N910T using Tapatalk

  3. #3

    Default Re: WTS Mockbug. First small series run

    Thank you Pilo
    Much appreciated.

  4. #4

    Default Re: WTS Mockbug. First small series run

    Wish i had the cash.. Gl with the sale!

    Sent from my SM-N910T using Tapatalk

  5. #5
    Moderator
    archimedes's Avatar
    Join Date
    Nov 2010
    Location
    CONUS, top left
    Posts
    12,993

    Default Re: FS: Mockbug. First small series run

    Congrats on getting your project to this point, it has been a pleasure to follow your build thread.

    You are welcome to link that up here for reference, if you like, by the way.

    Best wishes for your sale !
    ... is the archimedes peak

  6. #6

    Default Re: FS: Mockbug. First small series run

    Excellent, to see. I can't resist, I'll take number 12 please, with the black oxide finish! I might want to go with the customized modes, I'll send you a PM about configuring the light.
    Last edited by Zandar; 08-16-2019 at 09:51 AM.

  7. #7

    Default Re: FS: Mockbug. First small series run



    1 Mockbug Steel Lights with nickel finish.
    Default firmware
    PM incoming with a question.
    Who needs to see the light at the end of the tunnel when you have friends on CPF?
    My flashlight videos: http://www.youtube.com/playlist?list...9TIYcGeuBXa5m0

  8. #8
    Enlightened
    Join Date
    Feb 2016
    Location
    California, US
    Posts
    90

    Default Re: FS: Mockbug. First small series run

    Oh, those are great. I'll take a nickel finish with default firmware, please.

  9. #9

    Default Re: FS: Mockbug. First small series run

    @ Archimedes
    Thank you and i’m glad you liked it. On a personal note it was a bit of a marathon but as with so many things. If it’s hard it’s likely to be worth doing
    And… I’ll update the post with a link. I wasn’t really sure if that was allowed so I figured I’d be cautious.

    @ Zandar. It’s yours.
    And i’m glad you’re here

    @ badtziscool
    Done! I’ll off-cause reply.

    @ jal
    Welcome to the party. You got it.
    I’ll PM you with details.

    I’ts a funny thing.
    I spent more hours watching the thread today than i care to tell and the moment i step out for a couple of hours stuff happens. I guess it’s a time zone thing.
    Last edited by AER-Lights; 08-16-2019 at 11:31 AM.

  10. #10
    Enlightened
    Join Date
    Jan 2019
    Location
    Norway
    Posts
    27

    Default Re: FS: Mockbug. First small series run

    I will take number 10

    Standard firmware.

  11. #11

    Default Re: FS: Mockbug. First small series run

    @ TailoredEDC

    It's yours!
    I'll PM you with details.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •