Fenix Outfitters        
Results 1 to 2 of 2

Thread: How often to clean and lube the circuit board in the HDS battery compartment?

  1. #1
    Flashaholic* RCS1300's Avatar
    Join Date
    Aug 2012
    Location
    Stamford, CT
    Posts
    1,154

    Default How often to clean and lube the circuit board in the HDS battery compartment?

    I am doing battery changes daily. Every time I open and close the battery compartment the battery signal wire moves across the circuit board inside the HDS head in the battery compartment. The battery signal wire in my aluminum lights is thin and probably does not create too much friction. The battery signal wire in my Titanium light is thicker and I imagine it creates more friction every time I open and close the battery compartment.

    I was wondering how often I should clean and lube the circuit board in the HDS battery compartment?

    Also, what do you use at HDS as an applicator for the grease on the circuit board in the HDS head?
    Last edited by RCS1300; 08-17-2019 at 02:19 PM.

  2. #2

    Default Re: How often to clean and lube the circuit board in the HDS battery compartment?

    It is the exact same wire. The one in the titanium light just has insulation on part of the wire.

    If the board looks clean... don't touch it.
    If the board looks dirty, clean it and lube it. We use a foam type Q-tip to lube so it doesn't leave fibers in there.
    Thor's Hammer Custom Leather
    HDS Systems Henry's Mini-Me
    I play with dead things

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •