Flashlight for power emergencies and attic/basement DIY work

CBET

Newly Enlightened
Joined
Oct 8, 2019
Messages
2
Hi all,

Looking to get a couple of flashlights for power outages and various house work in the attic/etc. Must be reasonably durable for dropping 2-3 feet on ground/concrete, waterproof, and dust resistant. Will use rechargeable AA batteries (have a bunch of Eneloops in various devices, have multiple chargers). Would prefer longer runtimes, so probably two AA's rather than one.

1) How would you prefer to purchase the light?

____I would like to purchase the light in person from a brick and mortar store. I am located in ______________.
_X_ This will be mail-order or Online (location doesn't matter).


2) Budget: An easy question, but you may change your mind after answering the rest! :)

____I don't know yet
____Up to $25.
_X_ Up to $50.
____Up to $100.
____Up to $200.
____Up to $300.
____Essentially unlimited.


3) Format:

____I am not sure, please help me decide.
_X_ I want a flashlight (hand held/self contained).
____I want a self-contained headlamp.
____I want a headlamp with an external pack/power source.
____I want a mounted light (typically for a bicycle or vehicle)
____I want a lantern/area light.
____I want a portable spotlight (it may have an external power source).
____Other ____________________________________________


4) Size:

____MICRO - Keychain size.
____TINY - Every day carry (2-4 inches).
_X_ SMALL - Every day carry (4-7 inches).
____MEDIUM - Holster/belt ring carry. (>7 inches)
____LARGE - Big enough to need its own travel case.
____I don't know/I don't care.


5) Emitter/Light source:

_X_ LED (known for efficiency, longevity, and compactness)
____Incandescent (known for superior color rendition)
____HID (known for max output, but often at the expense of size)
____I don't know.


6) Manufacturer:

_X_ I want to buy a light from a large/traditional manufacturer that is ready to go out of the box.
_X_ I would like a light from a specialty manufacturer (Possibly limited run/Custom).
____I am interested in assembling my own components. (for example a "host" or flashlight body from one manufacturer, and a "drop-in" emitter from another source).


7) What power source do you want to use?

____I intend to use "Primary"/Disposable Alkaline batteries based on the usual AAA/AA/C/D sized cells common to most stores.
____I intend to use "Primary"/Disposable Lithium batteries based on the usual AAA/AA/C/D and CR123 sized cells common to most stores (often a cold weather or long storage choice).
_X_ I intend to use Rechargeable cells (NiMH or NiCD) based on the usual AAA/AA/C/D sized cells common to most stores.
____I intend to use Rechargeable cells based on less common formats (18500 or 18650 Li-Ion, RCR123, et-al).
____I want a light with an integrated rechargeable battery pack.
____I don't know/I need more information on power sources.

7a) If you have selected a rechargeable option
____I want a light that plugs directly into the wall (literally with prongs built into the light)
____I want a light that has a recharging adapter (your typical "wall wart")
____I want a light that snaps into a cradle (usually mounted on a wall)
_X_ I want a separate/stand-alone charger (this involves removing the batteries to charge)
____I don't care


8) How much genuine out the front (OTF) light do you want/need? Sometimes you can have too much light (trying to read up close up with a 100 lumen light is not a happy experience).

____I want to navigate a dark room or read a map (1-10 lumens).
____I want an indoor "blackout" light (15-50 lumens)
_X_ I want to confidently walk around an unlit/unpaved rural area (60-150 lumens).
___ I want to illuminate my entire backyard or a campsite (150-300 lumens).
____I want to illuminate an entire field, the neighbor's front yard several houses down, impress my friends and neighbors, etc. (300-700 lumens).
____I want search and rescue type illumination (800+ lumens).

____SPECIAL NOTE: Burst/Turbo mode Category - There are several lights that will run at a super bright maximum for a very limited period (usually 5-10 minutes) and then will "step-down" to a lower level for thermal control. Check here if this is acceptable.


9) Flood vs Throw: Flood covers an area, Throw reaches out to a distance.

____All Flood: I am doing "arms length" tasks like reading and campsite cooking.
_X_ Wide Flood: I want a defined flood area for semi-close tasks like after-dark campsite tasks or working on a car.
____Narrow Flood: I want a sharply defined flood area that will project some distance for tasks like trail walking.
____Wide Throw: I want a beam with a noticeable hot-center for distance throw and a significant amount of "side-spill". Good for rough trail hiking, search and rescue, and general distance work.
____Narrow Throw: I want a beam with a very tight "hot center" and minimal "side-spill". Good for distance viewing, fog, and looking through dense undergrowth.
____Turbohead: I want a far-distance projector with a sharply focused spot of light and minimal or zero side-spill. Good for extreme distance and impressing your friends.

9a) Distance: How far away will you typically need to see with this light (check all that apply)
____Less than 1 yard/meter (reading, other close work)
____Less than 5 yards/meters (looking for something inside a dark shed/garage/basement)
_X_ 5-20 yards/meters (check out a noise in the backyard)
____30-50 yards/meters (I have a big backyard)
____50-150 yards/meters (I live in a very rural area/farm with wide open spaces)
____150+ yards (I am searching from a helicopter)

10) Runtime: Not over-inflated manufacturer runtime claims, but usable brightness measured from first activation to 50% with new batteries (Measured on maximum continuous output).

____Up to 30 minutes (I want the brightest [and potentially smallest] light for brief periods)
____30-60 minutes (I have plenty of batteries just ready to be changed)
_X_ 90-120 minutes (Runtime is moderately important, but still not critical)
____3 hours + (I critically need this light to run on max for extended periods in between battery changes/charges).




11) Durability/Usage: Generally the old phrase "you get what you pay for" is very accurate for flashlights.

____Not Important (A "night-stand" light).
____Slightly Important (Walks around the neighborhood).
_X_ Very Important (Camping, Backpacking, Car Glove-box).
____Critical (Police, Fire, Search & Rescue, Caving, Survival).
____I don't know.


12) Switch Size, Type, and location (choose all that apply):

____Any size switch will do.
____I need a BIG switch (I'll be using gloves or have very large hands or coordination issues).
____I want a forward clicky (Helpful for momentary activation and signaling).
____I want a reverse clicky (For use with multi-mode/level lights).
____I want a momentary switch (Predominantly for use with signaling and short bursts of momentary light only).
_X_ I want a twisty switch (Tighten the head/tailcap to activate, and the light will stay on until the head/tailcap is loosened).
_X_ I want a body mounted switch (near the head, like on a Maglite).
_X_ I want a tail mounted switch (found on the majority of today's high end lights).
____I want a remote switch (usually found on high-end bicycle headlights)
____I don't care.
____I don't know.
____Other, please specify____________________.


13) User Interface (UI) and mode selection. Select all that apply.

____A simple on-off with only one output level is fine for me.
_X_ I want 2 light levels. (Brighter/short runtime and Dimmer/long runtime.)
_X_ I want multiple light levels. (Some lights have 5-16 light levels.)
____I want a programmable light.
____I want a selector ring.
____I want a strobe mode. (Oscillating pattern to confuse/blind aka "Police Mode")
____I want SOS mode. (blinks in ...---... emergency pattern)
____I want a beacon mode. (Regular flashes at full power to show location.)
____I don't care.
____I don't know.


14)Material/Finish/Coating

____Plastic/composite body (this may limit your choices significantly).
____Anodized Aluminum – either type II or III (Hard Anodized) (Aluminum, specifically HA, is the most common material/finish for today's higher end flashlights).
____Stainless steel (durable, but much heavier than aluminum)
____Titanium (durable and nearly as lightweight as aluminum, but can be moderately to significantly more expensive).
_X_ I don't care.
____I don't know.
____Other, please specify____________.

15) Water resistance
____None needed
____IPX4 (Splash resistant)
_X_ IPX7 (Waterproof to 1 meter/30min)
____IPX8 (Submersible to greater than 1 meter for 4 hours)

16) Storage conditions
_X_ In house (temperature/climate controlled environment)
____Emergency kit (long standby periods)
____Automobile glove-box (wide temperature swings, long standby periods, critical reliability)
____Other_____________________________________________


17) Special Needs/extras: Is there anything else you want or need that hasn't been mentioned? Select any/all below.

_X_ Not too cold/blue light (maybe 3500-4000K), reasonable high CRI so easy on the eyes
 

xxo

Flashlight Enthusiast
Joined
Apr 30, 2015
Messages
3,010
Sounds like the 2AA Energizer hardcase Task light would be good for this application.

Tu4w16s.jpg



We have a recent thread on this over in the budget forum:

https://www.candlepowerforums.com/v...-Hardcase-300-Lumen-2AA&p=5339769#post5339769
 

LeanBurn

Flashlight Enthusiast
Joined
Feb 3, 2010
Messages
1,355
Location
Alberta
Have you tried the Parametrek flashlight guide?

Just plug in the values you are looking for and it lists them. Some would be:
Fenix E12
Thrunite Archer 1A/2A
Manker E11
 

PartyPete

Enlightened
Joined
Aug 14, 2015
Messages
486
If you are looking specifically for a 2x AA light, the Thrunite Archer 2A and Fenix E20 are both good.

I've actually had the Fenix for many years and it's an excellent, no frills 2x AA utility light. Very tough and probably seen more drops and water than I can remember and still works fine.
 

longuylander

Newly Enlightened
Joined
Jul 31, 2019
Messages
25
I will vouch for the Fenix E20 also. It's a great, straight-forward light. Its only downside for your needs is it is more a thrower than flood. It has decent spill, but a diffuser would help for more light dissipation during indoor use.
 

LetThereBeLight!

Enlightened
Joined
Feb 26, 2014
Messages
635
Given what the OP stated, I'd recommend the Lumintop Tool 2.0 with a 14500 battery in it, one that Nitecore makes that has the port to recharge it built right into the battery itself.

The Tool 2.0 would of course also run on AA batteries.

- LetThereBeLight!
 

Whitehawkup

Newly Enlightened
Joined
Oct 13, 2019
Messages
4
I also will vouch for the lumintop tool AA 2.0 with a Nitecore 14500 micro-usb rechargeable battery. Lots of light in such a small package. And even if for some reason you have to use regular AA batteries, you would have slightly longer runtimes and still have more than enough lumen output for your needs.
 

LeanBurn

Flashlight Enthusiast
Joined
Feb 3, 2010
Messages
1,355
Location
Alberta
I agree with Poppy.

Hands-free lighting is indispensable and very underrated. When I know I am going to have to work with my hands, I only reach for headlamps.

If you were to try out Parametrek flashlight tool it can accelerate your search by quite a bit.
 

CBET

Newly Enlightened
Joined
Oct 8, 2019
Messages
2
Thank you everyone, I ended up getting Thrunite Archer V3 and Energizer Headlamp. Also got a pack of Energizer Hardcase flashlights to give away as gifts this holiday season.
 
Top