• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired FS: Malkoff, Oveready, Lumen Factory

Jimmyboots

Enlightened
Joined
Feb 20, 2015
Messages
396
Posting some stuff up that is not being used. Please PM or email at fq55ls at gmail with any questions.


Not looking for trades at this time.


First up a Malkoff 1st run MDC HA 1-3V


This one is numbered 0147 and is from the first batch of MDC's. The interesting thing about these is the voltage range which makes this set up to run off of a single primary CR123's or single and double AA batteries.


Modes are 200/60/strobe. These are brighter than the specs that were posted by Malkoff fyi.


Condition is used, with light missing ano on the head and the body has little dings scratches and dents. The clip looks like it was "flame" darkened but otherwise works Perfectly.


Makes a great travel light.


Asking for $60.00 shipped in the USA.


Next is a Lumen Factory Surefire E Series 3 Mode Head Unit (2.7V-4.5V), XP-L2, HA3 Black
Purchased this new for my old E2 and am not a fan of the warmer tint. Warm Tint 90-CRI with Max Output at 550 Lumens. IMPORTANT: THIS IS MEANT TO BE USED WITH A SINGLE CR123 OR RECHARGEABLE Li-Ion battery like a RCR123 or 16650


-2.7V-4.5V Regulated Input for Maximum Flexibility
-3 Mode Version (5%-30%-100% with Memory Function)
-Maximum Current Input to LED at 1200mA
-Warm White, Warm Colour Temperature (2600K-3200K)
-Reverse Polarity Input Protection
-Over-Discharge Protection
-HA3 Black Anodizing on the Head Unit
-Constant Output
-Unique Reflector Design
-Precision Machined Aluminum Reflector
-High Temperature Resistant Light Orange Peel Coating
-Every Reflector Module is Pre-Focused for the Ultimate Spot
-Stainless Steel Scalloped Front Bezel
-Thickness of the glass lens has been doubled
-Duo front O-rings for better weather protection and shock resistence
-Blackened and hardened using Mil-Spec QPQ process on the Stainless Steel Front Bezel.
-Made with highest grade 7075-T6 Aerospace Aluminum


Compatible with:
Surefire
E1, E1E using 1 x CR123a Primary Cell
E2, E2E, E2D, E2O, L4 Digital Lumamax
and Malkoff MDC series lights
Runtime:
1 x CR123a Primary: ~1 hour
1 x RCR123 (16340) Rechargeable: ~40 mins.
1 x AW17670 (1600mAh): ~1 hour


Asking for $50.00 shipped


Next is a Oveready Optic DIP 8 Mode Group P60 Dropin – XPL 4000k
This dropin is used and is in very good condition. The optic has provides very good throw.


DIP are configuration switches. Our driver checks their position during power on and sets your mode group based on how you've arranged them. Monster optic provides more throw than should be possible in a standard P60 package. Works with P/C/Z and compatible hosts, 18350, 18490, and 18650 batteries.

  • Custom aluminum heatsink
  • Two piece construction with swappable optics
  • Driver Input 3-4.2v (1 rechargeable)
  • Battery protection (dim then cutoff at 2.8v)
  • 1000+ lumens on high (XPL)
Three DIP switches provide eight different mode groups:
1 1 1 – high only
0 1 1 – low only
1 0 1 – high low
1 1 0 – low high
0 0 1 – high med low
1 0 0 – low med high
0 1 0 – high med low dim
0 0 0 – dim low med high


Asking for $60.00 shipped in the US


PHOTOS:

Malkoff
vxz6aIU.jpg

f6I3pgG.jpg

gKIxEZs.jpg

fzStInh.jpg

OLLHYIo.jpg



Lumen factory E Series head
0w7CSK8.jpg

mM4XOR6.jpg

S4b7FYa.jpg

This is just to show what it would look like on a Surefire E2
pmLFXQc.jpg


Oveready
8bEPNJa.jpg



 

aginthelaw

Flashlight Enthusiast
Joined
Jan 28, 2007
Messages
2,655
Location
NJ, USA
Or I can put the Lumen Factory Surefire E Series 3 Mode Head Unit (2.7V-4.5V), on the mdc ha body and fall in love all over again

this stuff is awesome. Thanks
 
Top