Wonder
Newly Enlightened
How to identify Olight MCC's. MCC Gen1, MCC Gen 2, MCC 1A, MCC 1AL should be cross compatible.
The new Smart MCC aka MCC 1A/1.5A/2A should be the same but others including myself have seen some odd behavior with them. Green charging complete LED while still charging leading to incomplete charging if the light is removed. Checking cell voltage once LED goes green shows voltage of 4.12 volts. If you put the light back on the charger you get a green LED. If you had left the light on the charger in the first place for about 1 hour longer then checked the cell voltage you would find the cell at about 4.17 volts. See S2R II on the charger below. Note the green complete LED even though the USB DMM shows the light is still charging. Intermittent no charge or super slow to charge. LED will be red so you think its charging. Turning on the light while on the charger will get the charger charging. On top of the above the Smart MCC and M2R Pro can have poor connection problems causing slow charging that is related to how the tail cap is made on the M2R Pro. Olight must know about this by now. What is the fix? Stay tuned. The S10R III and S30R III shipped with the MICRO-DOK III not the MCC Gen 1.
The new Smart MCC aka MCC 1A/1.5A/2A should be the same but others including myself have seen some odd behavior with them. Green charging complete LED while still charging leading to incomplete charging if the light is removed. Checking cell voltage once LED goes green shows voltage of 4.12 volts. If you put the light back on the charger you get a green LED. If you had left the light on the charger in the first place for about 1 hour longer then checked the cell voltage you would find the cell at about 4.17 volts. See S2R II on the charger below. Note the green complete LED even though the USB DMM shows the light is still charging. Intermittent no charge or super slow to charge. LED will be red so you think its charging. Turning on the light while on the charger will get the charger charging. On top of the above the Smart MCC and M2R Pro can have poor connection problems causing slow charging that is related to how the tail cap is made on the M2R Pro. Olight must know about this by now. What is the fix? Stay tuned. The S10R III and S30R III shipped with the MICRO-DOK III not the MCC Gen 1.
Last edited: