Luter
Enlightened
FS: Lumeray transformer + Lumeray M
Hello everyone.
Long time I haven't posted anything here, but that doesn't mean I didn't work on anything, as it's my hobby I do time to time spend time with turning and playing with flashlights.
Recently I discovered that a new format batteries came out so I made a flashlight around it, but as the battery is quite long (21700) I made also tube for smaller batteries as well so the flashlight becomes a transformer.. The tubes can also be screwed together with a center ring to become a batteries case? or whatever anybody wishes to put it in.
Titanium 6AL4V body, reverse switch on the head, 4.5Amp guppydrv Rev.2 , XP-G3 S5 3C 5000K quad led with green afterglow.
Size: 32mm diameter, 124mm long with 21700 battery, 102mm long with 26500 battery or 90mm long with 26350 battery.
Withdrown here but you can find it at lumeray.com
I'm usually my own during the Christmas holidays and what better spend that time than doing thing I love, so I made another two lights, both running with 18500 batteries, the stright is my classic Lumeray M with 3 up - XPG 3 - 4000 K and 3Amp guppydrv Rev.2 driver, narrow optics and rear reverse switch.
The angle was a bit of a challenge as I wanted the reverse switch to be at the back behind the led itself after couple of goes I managed it and the result is very interesting.
It has wide-angle titanium anodized optics with Nichia C219 90+ CRI and 1,5Amp guppydrv Rev.2 driver.
Both 6AL4V titanium body, head and pocket clip as usual.
Size
Lumeray M - 93mm x 25mm dia
Angle M - 88mm x 25mm dia
Price
Lumeray M: Withdrown here but you can find it at lumeray.com
Angle M: $600 $550 SOLD! including P&P
Thank you
Hello everyone.
Long time I haven't posted anything here, but that doesn't mean I didn't work on anything, as it's my hobby I do time to time spend time with turning and playing with flashlights.
Recently I discovered that a new format batteries came out so I made a flashlight around it, but as the battery is quite long (21700) I made also tube for smaller batteries as well so the flashlight becomes a transformer.. The tubes can also be screwed together with a center ring to become a batteries case? or whatever anybody wishes to put it in.
Titanium 6AL4V body, reverse switch on the head, 4.5Amp guppydrv Rev.2 , XP-G3 S5 3C 5000K quad led with green afterglow.
Size: 32mm diameter, 124mm long with 21700 battery, 102mm long with 26500 battery or 90mm long with 26350 battery.
Withdrown here but you can find it at lumeray.com
I'm usually my own during the Christmas holidays and what better spend that time than doing thing I love, so I made another two lights, both running with 18500 batteries, the stright is my classic Lumeray M with 3 up - XPG 3 - 4000 K and 3Amp guppydrv Rev.2 driver, narrow optics and rear reverse switch.
The angle was a bit of a challenge as I wanted the reverse switch to be at the back behind the led itself after couple of goes I managed it and the result is very interesting.
It has wide-angle titanium anodized optics with Nichia C219 90+ CRI and 1,5Amp guppydrv Rev.2 driver.
Both 6AL4V titanium body, head and pocket clip as usual.
Size
Lumeray M - 93mm x 25mm dia
Angle M - 88mm x 25mm dia
Price
Lumeray M: Withdrown here but you can find it at lumeray.com
Angle M: $600 $550 SOLD! including P&P
Thank you
Last edited:
