ReyLight copper pineapple mini, AAA/10440 flashlight, Nichia 219B 4500K R9080 high CR

hbk_rey

Enlightened
Joined
Nov 2, 2014
Messages
503
Link here.


Made of solid copper bar.
Using single AAA battery, max 90 lumens, or 10440 Li-ion battery, max 240 lumens.
The driver has: Battery reverse protection. High temperature protection. Low voltage protection.

Reverse clicky switch. Full click to turn on or off, half click (tap) to cycle modes.
Program: When the light is on, quickly half click 8+ times.
1. Select different modes groups. (1-4 groups)
2. Turn on of off memory function. (Default is off)
3. Turn off or on moonlight mode. (Default is on)
4. Mode order. L-M-H → H-M-L (ascending or descending)
5. Reset.

Shortcuts: Quick double clicks = turbo
Modes groups #1-4.
1. moon-2-20-100%
2. moon-10-40-100%
3. moon-2-10-50%
4. moon-50-100%-strobe-SOS
Copper pineapple mini-1 by Rey Ye, 於 Flickr
Copper pineapple mini-2 by Rey Ye, 於 Flickr
Copper pineapple mini-3 by Rey Ye, 於 Flickr
Copper pineapple mini-4 by Rey Ye, 於 Flickr
Copper pineapple mini-5 by Rey Ye, 於 Flickr
 
Last edited:

Johnnyh

Enlightened
Joined
Jan 5, 2017
Messages
922
Location
Upstate NY
I'm a sucker for copper...and 219B R9080...and updated firmware and new raised tail switch...had to order!
 

Johnnyh

Enlightened
Joined
Jan 5, 2017
Messages
922
Location
Upstate NY
Rey, any specific reason you decided to go with the raised tail? I like it for the simple reason that where I live and work, gloves are often in use...it's cold outside and dirty at work...much easier to use with a gloved hand.
 

hbk_rey

Enlightened
Joined
Nov 2, 2014
Messages
503
Rey, any specific reason you decided to go with the raised tail? I like it for the simple reason that where I live and work, gloves are often in use...it's cold outside and dirty at work...much easier to use with a gloved hand.

Hi John,

There isn't much roon for a switch inside this small light. If the button is inside the tail, it will be really diffcult to reach it.
 

Johnnyh

Enlightened
Joined
Jan 5, 2017
Messages
922
Location
Upstate NY
Hi John,

There isn't much roon for a switch inside this small light. If the button is inside the tail, it will be really diffcult to reach it.

Yep, find this with a Lumintop Ti Tool that I have. Glad you didn't go that route...thanks!
 

hbk_rey

Enlightened
Joined
Nov 2, 2014
Messages
503
Ti mini is ready for order.
https://www.reylight.net/product/reylight-copper-pineapple-mini-aaa-10440-flashlight-nichia-219b-4500k-r9080-high-cri-led/
 

tjswarbrick

Enlightened
Joined
Mar 19, 2011
Messages
691
Location
SF Bay Area, CA
Got my 219b sw45k R9080 ReyLight Pineapple from County Comm on Saturday.
Included 10440 was only 50% SoC, so I dropped in an Eneloop.
Easy to hit the switch, and a gorgeous tint. Gorgeous copper finish, too.

Charged up the 10440. Dropped it in.
Still nothing.
Is there a trick for running Li-Ion in this guy?
It's not a button-top, and is the battery included in the package. Charger display confirms 100% State of Charge.
Is there an easy way to determine if the issue lies with the battery or with the light?
(I don't have another 10440 on hand to test.)

Received replacement battery from CC.
Works!
 
Last edited:
Top