kosPap
Flashlight Enthusiast
greetings all!
Some time ago, I made a hi-amp triple DIY module but performance was dissapointing. yet it clocked well "on the bench".
So today I made some measurements of common switches' performance by measuring current draw on 2 PWM Direct Drive modules
In short the well known Forward Click switch did a bit better than expected.Disappointing were the McClickie and the Solarforce L2D hi amp reverse switch.
And here is my test setup. Yes, I know there are many variables involved, but the setup was kept constant as shawn. And i took care to jiggle with the crocodile clip contact getting the best posible of.
regards, kostas
Some time ago, I made a hi-amp triple DIY module but performance was dissapointing. yet it clocked well "on the bench".
So today I made some measurements of common switches' performance by measuring current draw on 2 PWM Direct Drive modules
In short the well known Forward Click switch did a bit better than expected.Disappointing were the McClickie and the Solarforce L2D hi amp reverse switch.
And here is my test setup. Yes, I know there are many variables involved, but the setup was kept constant as shawn. And i took care to jiggle with the crocodile clip contact getting the best posible of.
regards, kostas