The Malkoff Potential Group Buy Sounding Board

dotCPF

Flashlight Enthusiast
Joined
Dec 20, 2018
Messages
1,702
Location
New Angleland
Hello everyone, thought this was a good idea. The Front Porch is getting a bit convoluted with all our group buy requests. (Group Buys, so hot right now.)

Let's keep all talk of Potential Group Buys for Malkoff Devices product in this thread.

This is not an official sign-up thread!


Potential Group Buy Interest Lists:

Please direct allColored M61 Dropin discussion to the GB thread linked here!

(https://www.candlepowerforums.com/v...61-LL-Dropin-Group-Buy!&p=5420706#post5420706)


Warm SST Maglite Conversion


  1. invisiblefrodo
  2. dotCPF
  3. marco.weiss
  4. thermal guy
  5. sgt253






M61Y (Amber) L/LL/LLL

  1. PaperKnife
  2. siklops
  3. fresh eddie fresh
  4. greatscoot
  5. flashlight nut
  6. bigburly912
  7. Russ/TN

BodyGuard w Hi/Lo ring.
1. RSLSCKBEKLSHKL
2. marco.weiss
3. mr45acp2u

M61 Neutral HOT
1. mk2rocco

2: desert.snake
3: wicky998
4: Mister S
5: id30209
6: dotCPF
7: GeoBruin


M61 SST-20 4000K

  1. greatscoot
  2. dotCPF
  3. nmiller
  4. PaperKnife


M31 Vampire L-of-some-sort SST-20 4000K


M61T Osram CSLNM1/ CSLPM1 ('White 1mm/ White 2mm')

  1. neutralwhite
  2. dotCPF
  3. id30209 (W2)



MDC AA Throw, CSLNM1 'White 1mm'


M91 'High Noon' LH351D 90 CRI

1. dotCPF
2. neutralwhite
3. id30209
4. jrgold
5. GeoBruin
in
 
Last edited:

thermal guy

Flashaholic
Joined
Jan 28, 2007
Messages
9,970
Location
ny
Cool. I'll take 2 M61NLLLL 5000k😁 sorry know this isn't a GB starting thread but that's what I would like to get.
 

dotCPF

Flashlight Enthusiast
Joined
Dec 20, 2018
Messages
1,702
Location
New Angleland
Regarding the M61N LLLL Group Buy

Yeah so I'll just restart my conversation/ GB musings here.

I will have the post for the M61N LLLL Group Buy up probably tomorrow, thought I was going to get some time last night but it did not work out that way. #sorrynotsorry

ANYWAYS

My current thoughts are as I posted over on the Front Porch. I will have everyone sign up and indicate their preference of 5000K or 4000K. It is not likely or guaranteed to get both, so we will tentatively say that at the end of the initial sign up period (aka PHASE 1) whichever has a higher amount of interest will be the chosen K temp. If it's close to a 50/50 split, we will discuss doing 4500K as a compromise. The LED will likely be an XP-G2, likely 80/ 85 CRI. I will be asking Gene if he happens to have some in stock as I know some of his batches of 4000K XP-G2s were very nicely tinted. If it's another K temp we will likely have to supply the LEDs, in which case CRI choice can be a discussion.

Signing up is commitment to the group buy as a WHOLE, so if we do not end up going your preferred K temp, it will hereby be considered a "**** move" to back out at that point as the group will be relying upon everyone's interest to be initiated. Please take this into account signing up. It remains possible that there is enough interest to get both K temps created, but only if there are 20+ of each.





As I have said elsewhere, my original run M61N LLLL draws 33ma @ 9V, 37ma @ 6V, and 55ma @3.6V. Output is roughly 23 lumens. Output w/ High/ low ring on 'low' is roughly 1 lumen, effectively the same as any other M61 dropin on 'low' as current draw is the same for all high/ low rings.
 
Last edited:

dotCPF

Flashlight Enthusiast
Joined
Dec 20, 2018
Messages
1,702
Location
New Angleland
Please note this thread is not for sign ups, but discussing and organizing potential group buys are desired. It may be helpful if we post in the first line of our comment what group buy we are referring to.
 

RSLSCKBEKLSHKL

Newly Enlightened
Joined
Feb 3, 2019
Messages
157
I'd love to see a Bodyguard V3 as the V2 that has either high low ring or click to once for high and twice for low. Same form factor as the V2 but with 1100 lumens on high and maybe 20-30 on low. 2 primaries or 18650 just like the V2 also.
Available in cool or neutral.


Sent from my iPhone using Tapatalk
 

thermal guy

Flashaholic
Joined
Jan 28, 2007
Messages
9,970
Location
ny
"**** move"

Lol. Very good to put this out there. It would suck if the poll decides on 5000K and 8 people back out due to wanting 4000K. Would probably ruin it for us all. Soooo. You have been warned 😁
 

thermal guy

Flashaholic
Joined
Jan 28, 2007
Messages
9,970
Location
ny
" As I have said elsewhere, my original run M61N LLLL draws 33ma @ 9V, 37ma @ 6V, and 55ma @3.6V. Output is roughly 23 lumens. Output w/ High/ low ring on 'low' is roughly 1 lumen, effectively the same as any other M61 dropin on 'low' as current draw is the same for all high/ low rings."

So this is interesting. I just checked and my M91 and M61 draw the same with the head on low"76ma"
So how does that work if the high draw is only 40-50 ma?
 

dotCPF

Flashlight Enthusiast
Joined
Dec 20, 2018
Messages
1,702
Location
New Angleland
I shouldn't have said current draw I think. I should have said resistor. That's interesting though, IDK I'm not an expert. I'll ask Gene next email.
 

greatscoot

Flashlight Enthusiast
Joined
Dec 14, 2011
Messages
1,961
Location
169.254.34.49
I will keep an eye on this thread and keep as best a tally as possible of the requests. Not an official binding list. Also, this by omeans that these will happen, just an easy way to keep track.

M61RL(L)? (HyperRed).
1. AndyF
2. Greatscoot
3. RedLED
4. NeutralWhite
5. FlashlightNut

BodyGuard w Hi/Lo ring.
1. RSLSCKBEKLSHKL
 
Last edited:
Top