Wuben        
Results 1 to 8 of 8

Thread: Fenix PD36R charging port dust cover

  1. #1

    Default Fenix PD36R charging port dust cover

    This question is for owners of the Fenix PD36R flashlight. The charging port dust cover on my light won't stay in place. I only used this port twice to charge the battery and now it won't stay in. My question is there anyone that had the same problem? I made the mistake of taking the cover off and replace it with the spare. That was before I realized there was no spare included. Now I can't get the cover in at all. Were you able to get the problem rectified?
    davemp

  2. #2
    Flashaholic* F250XLT's Avatar
    Join Date
    Dec 2008
    Location
    I can see the Windmills...
    Posts
    2,354

    Default Re: Fenix PD36R charging port dust cover

    Did the "nub" that locks it in get damaged?
    "I am not a Collector" - Tim

  3. #3

    Default Re: Fenix PD36R charging port dust cover

    The nub doesn't look damaged. The whole thing doesn't fit in it's spot.

  4. #4
    peter yetman's Avatar
    Join Date
    Mar 2014
    Location
    North Norfolk UK
    Posts
    4,850

    Default Re: Fenix PD36R charging port dust cover

    Have you tried licking it? Always works for me on that sort of thing.
    P
    "O frabjous day! Callooh! Callay!" He chortled in his joy.

  5. #5
    Flashaholic* F250XLT's Avatar
    Join Date
    Dec 2008
    Location
    I can see the Windmills...
    Posts
    2,354

    Default Re: Fenix PD36R charging port dust cover

    Be sure you're pushing the nub into the charging slot first, no reason it shouldn't fit.
    "I am not a Collector" - Tim

  6. #6

    Default Re: Fenix PD36R charging port dust cover

    Quote Originally Posted by davemp View Post
    The nub doesn't look damaged. The whole thing doesn't fit in it's spot.


    Im confused. If it was in there once it will go in there again.

  7. #7

    Default Re: Fenix PD36R charging port dust cover

    Quote Originally Posted by davemp View Post
    The nub doesn't look damaged. The whole thing doesn't fit in it's spot.

    Have you checked so you don't have any leftover mould marks on the nub itself? I had that issue with my Rovyvon Aurora and some careful use of a scalpel fixed it nicely.

  8. #8

    Default Re: Fenix PD36R charging port dust cover

    I recently purchased the PD36R. My rubber cover fits perfectly. I do plan on putting a Ranger band over mine so I donít get the cover damaged over time.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •