Acebeam        
Results 1 to 4 of 4

Thread: GT90vn on the way!

  1. #1

    Default GT90vn on the way!

    Bought his last one. Can't wait to try it out.
    Last edited by JimIslander; 06-18-2020 at 07:34 AM.

  2. #2

    Default Re: GT90vn on the way!

    Finally got out of the hospital (knee surgery) so I had a chance to try this beast out. Beam shots soon. I used VTC6 button tops (no flat tops in this light). They are specked out at 67.1 mm, but mine measure 67.6 mm. BARELY fit into the carrier. Partof Vinh's reliability mods are to solder bypass wire onto the carrier springs. This reduces some of the battery length range. Seriously, 1/10 mm more and these weren't going to workAt least they won't rattle.

    Vinh adds bypass wires onto the stock springs to maximize current flow. Stock springs picured:




    Old faithful NarsilM is easy to use and one of the best interfaces for my needs. May get a beam shot tonight, but I'm using a walker to get around and it's pouring rain. We'll see.
    Last edited by JimIslander; 07-10-2020 at 04:57 PM.

  3. #3

    Default Re: GT90vn on the way!

    Quote Originally Posted by JimIslander View Post
    May get a beam shot tonight, but I'm using a walker to get around and it's pouring rain. We'll see.
    Lol!! Priorities of a flashaholic!
    Who needs to see the light at the end of the tunnel when you have friends on CPF?
    My flashlight videos: http://www.youtube.com/playlist?list...9TIYcGeuBXa5m0

  4. #4

    Default Re: GT90vn on the way!

    Quote Originally Posted by badtziscool View Post
    Lol!! Priorities of a flashaholic!
    Gotta take one for the team! :-)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •