Jetbeam        
Results 1 to 4 of 4

Thread: Jet Beam Jet-I Pro question

  1. #1
    Flashaholic Parker VH's Avatar
    Join Date
    Oct 2008
    Location
    MN.
    Posts
    355

    Default Jet Beam Jet-I Pro question

    I have a Jet-I Pro I.B.S. My wife brought it home last weekend from our cabin saying it needed a new battery. I didn't check the old AA alkaline battery but just replaced it with a new one. I can't get the light to power up in any way. I doubt the LED burned out or anything else for that matter. The light has always worked fine and doesn't get much run time.
    Any help would be appreciated as to what I might try.
    Thanks.
    Bob
    Polarion PH50 & Night Reaper, AE Xenide 20w, POB 35W, SL Scorpion, SL-35X, POB 55W, Jet Beam Jet-1, DEFT HO, "X", & EDC LR, REV Victor Enthusiast, MULE 35/80W HID, Maxa Beam MBS-410.

  2. #2

    Default Re: Jet Beam Jet-I Pro question

    clean out the insides with alcohol,
    get rid of any excess lubricant (that could be creating a short circuit),
    remove any battery corrosion residues,
    and very lightly clean the end of the battery tube with fine emery paper
    (in case oxidation is preventing proper contact)

    Try again with a new battery
    I hope it works.

    if all else fails, buy a backup of your choosing

    I suggest a Lumintop Tool AA... as a possible alternative
    Last edited by jon_slider; 07-04-2020 at 05:00 PM.

  3. #3
    Flashaholic Parker VH's Avatar
    Join Date
    Oct 2008
    Location
    MN.
    Posts
    355

    Default Re: Jet Beam Jet-I Pro question

    Thanks but didn't seem to help. I would like a comparable size and comparable output light to this light using a standard alkaline battery. Open to opinions.
    Bob
    Polarion PH50 & Night Reaper, AE Xenide 20w, POB 35W, SL Scorpion, SL-35X, POB 55W, Jet Beam Jet-1, DEFT HO, "X", & EDC LR, REV Victor Enthusiast, MULE 35/80W HID, Maxa Beam MBS-410.

  4. #4

    Default Re: Jet Beam Jet-I Pro question

    Quote Originally Posted by Parker VH View Post
    I would like a comparable size and comparable output
    sad for your loss, I have no experience with your light model

    suggest you spend some quality time with google
    start by researching the light I recommended:
    https://lmgtfy.com/?q=Lumintop+Tool+AA

    and collect the specs for the light you have, so you can compare features
    https://lmgtfy.com/?q=Jet+Beam+Jet-I+Pro

    let us know what you learn

    there are several AA light options that come to mind for your research
    Eagletac D25a clicky
    Thrunite T10
    and others..

    given what I like, I would go with the AA Tool, in copper.. also available in Titanium, and Aluminium.

    since this is basically a "what to buy" thread, I have to be cautious, as rules frown on giving where to buy info... feel free to PM me if you want to have a private dialogue

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •