More Details:


  • Emitter: Three LEDs on a copper DTP MCPCB e.g.
  • Cree XHP50.2 3V LED
  • Optic: Aluminum Orange Peel reflector
  • Lens: Glass with anti-reflective coating
  • Flux: ~10,000 lm
  • Intensity: ~26055 cd ANSI throw ~325 m
  • Firmware: The FW21 pro uses free software called Andúril,
    distributed under the terms of the GPL v3.
  • User interfaces: [1] By default the FW21 pro is set to use SMOOTH RAMPING.
    Instant access to TURBO mode is also provided.
    [2] A more conventional STEPPED RAMPING UI is available if you
    like discrete modes level. You can choose how many steps you want.
    [3] MOMENTARY mode is useful for signaling purposes or rapidly/briefly
    lighting up targets. To exit this mode, physically disconnect power
    [4] MUGGLE mode uses a reduced output.
    [5] It has an electronic LOCKOUT for safety, but acts also as momentary
    low light.Other functions: Battery check, sunset, beacon,
    tactical strobe, party strobe, bike flasher, candlelight, lightning storm
  • Battery: One flat-top or button-top 21700 cell. An unprotected cell is recommended.
  • Max. length 70.5 mm. Cell is not included.
  • Driver: FET+7+1 driver. Low parasitic drain while OFF
  • Body: Aluminum with hard-coat anodizing