Acebeam        
Results 1 to 4 of 4

Thread: Identifying the version of a 3D Maglite

  1. #1
    Unenlightened
    Join Date
    Aug 2020
    Location
    Salisbury, UK
    Posts
    9

    Default Identifying the version of a 3D Maglite

    Hi, I'm trying to identify a 3D maglite that I've had for quite a few years.

    It's got a 'D' in the serial number but I'm wondering if the head is from an older model. I've measured down from the rim to the landing and it's 16.2mm or approx 0.62 inches.

    I've also tried my best to measure the opening of the landing and it seems to be about 34.7mm or about 1.36 inches

    The serial number is D38842190

    Many thanks
    Andy - UK

  2. #2
    sween1911's Avatar
    Join Date
    Dec 2003
    Location
    Pennsylvania
    Posts
    1,661

    Default Re: Identifying the version of a 3D Maglite

    Hey buddy, you can email your serial to Maglite (use the contact form on their website) and they can tell you exactly when it was manufactured. If the head was significantly older, it would be a bit too wide to fit.

    There's a wealth of info on LiftdT4R's website....

    https://maglitehistory.blogspot.com
    Dean Venture: "I'll get the flashlights!"
    Hank Venture: "And I'll get the astronaut Ice Cream!"

  3. #3
    Unenlightened
    Join Date
    Aug 2020
    Location
    Salisbury, UK
    Posts
    9

    Default Re: Identifying the version of a 3D Maglite

    That's just what I was looking for, many thanks.. I'll email Maglite and see what they have to say.

    Thanks for the link, also very useful

    Quote Originally Posted by sween1911 View Post
    Hey buddy, you can email your serial to Maglite (use the contact form on their website) and they can tell you exactly when it was manufactured. If the head was significantly older, it would be a bit too wide to fit.

    There's a wealth of info on LiftdT4R's website....

    https://maglitehistory.blogspot.com

  4. #4
    Unenlightened
    Join Date
    Aug 2020
    Location
    Salisbury, UK
    Posts
    9

    Default Re: Identifying the version of a 3D Maglite

    I received a reply from Maglite,
    it was manufactured back in July of 1994

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •