Hey all, never posted on the Oveready forum before, but I'm just lost as to what problem I could be facing right now. So I have a BOSS 35 in aluminum here, that will not turn on. Strange, because it worked just fine for probably about 3 weeks up until just recently. I first noticed an issue when the red secondary would flicker really quickly, despite it being disabled or rather, not programmed. Then a day later, I couldn't get it to turn on at all. I tried swapping batteries, cleaning the threads, then using a bit of nano oil to lube the threads, even connecting a battery using a wire to see if the switch could've gone bad, but no dice. The thing is, I noticed that when I insert the battery into the light, and attempt to use it like normal, it does heat up, albeit with no light coming out the front. Any ideas? I did reach out to Oveready via the "contact us" option on the website, and I know its a small operation, so the response time won't always be the quickest, so no worries on that end. For what it is worth, I tried a Vapcell 18350, a Keeppower 18350, and an Efest 18350, all IMR chemistry. As far as I can tell, it has to be a driver or contact issue, as direct connection made no difference, the switch seems fine, the threads are cleaned and lubed, so on.