NITECORE -- Keep Innovating        
Results 1 to 6 of 6

Thread: Macís Customs Ti Tri-EDC w/LUX-RC 371D + Steve Ku Ti E-switch

  1. #1

    Default Macís Customs Ti Tri-EDC w/LUX-RC 371D + Steve Ku Ti E-switch

    I've had this torch since Sept 2013. Over the years itís had several light engines and a few different mods. This has been a labor of love but I think itís finally time for us to part ways. Iíve done my best to document everything below but if you have any questions, please feel free to PM me. I hope whoever receives this light enjoys it as much as I have.

    Includes all the spare parts, batteries, and extras listed below. The 18350's are getting old and I recommend replacing them with KeepPower or Orbtronic IMR 18350 cells. I will reset the engine to the Oveready/LUX-RC factory default for single cell configuration. You can flash whatever configuration you like via the LUX-RC NXS R1 programming interface.

    https://photos.app.goo.gl/DzcBidCf7TdbUxbE8

    By popular demand, I'm splitting this into 3 options:

    1) Full kit (everything in the listing) $900

    2) Steve Ku Ti e-switch + 3x spare electronics $315

    3) Full kit minus option #2 (above) $615

    Prices include shipping & insurance within the US 50 states. If you are international, shoot me a PM.

    Mods:

    • LUX-RC 371D light engine (Cree XP-L HI 4200K U6 5B4, Amber aux LED) installed by Tana. Same as Oveready V5 light engine used in BOSS
    • C145 Tellurium Copper (CuTe) pill by mcbrat
    • 1.5mm flat sapphire crystal lens
    • Titanium boot retention ring by PhotonFanatic
    • Blue Fluorosilicone O-ring (size -017)

    Extras:

    • Rare Steve Ku Ti E-series e-switch w/extended 3-trit button (Haiku / Tri-EDC compatible)
    • 3x Steve Ku e-switch electronics
    • 5x AW IMR 18350 800mAh cells (circa 2014/2015)
    • 3x AW IMR 18350 700mAh cells (circa 2013)
    • Spare McClicky switch, boot, and original delrin retention ring
    • Original 2mm mineral glass crystal lens
    • Esslinger #107 flat lens gasket
    • Carclo 10507 TIR lens
    • DuPont Krytox GPL205 grease
    • Oveready delrin battery capsule (18350/16340/CR123A)
    • Needle nose pliers
    • Data sheet for the LUX-RC 371D engine
    Last edited by IsaacL; 02-20-2021 at 10:02 AM.
    On ne voit bien qu'avec le cúur. L'essentiel est invisible pour les yeux.

  2. #2
    Flashaholic Dakine234's Avatar
    Join Date
    Jun 2010
    Location
    Hawaii
    Posts
    260

    Default Re: Macís Customs Ti Tri-EDC w/LUX-RC 371D + Steve Ku Ti E-switch

    Pmd about the ku tail switch

    Sent from my SM-G981U1 using Tapatalk

  3. #3

    Default Re: Macís Customs Ti Tri-EDC w/LUX-RC 371D + Steve Ku Ti E-switch

    Quote Originally Posted by Dakine234 View Post
    Pmd about the ku tail switch

    Sent from my SM-G981U1 using Tapatalk
    I replied to your PM and I tried to reply to @ipreferpie but his inbox is still full.
    On ne voit bien qu'avec le cúur. L'essentiel est invisible pour les yeux.

  4. #4

    Default Re: Macís Customs Ti Tri-EDC w/LUX-RC 371D + Steve Ku Ti E-switch

    Parting this out by popular demand
    On ne voit bien qu'avec le cúur. L'essentiel est invisible pour les yeux.

  5. #5

    Default Re: Macís Customs Ti Tri-EDC w/LUX-RC 371D + Steve Ku Ti E-switch

    only light not batt ship to texas?

  6. #6
    lightknot's Avatar
    Join Date
    Apr 2009
    Location
    Tucson, AZ USA
    Posts
    2,829

    Default Re: Macís Customs Ti Tri-EDC w/LUX-RC 371D + Steve Ku Ti E-switch

    Beautiful light!
    LEP's!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •