Jetbeam        
Results 1 to 5 of 5

Thread: 28 W HID lamp base question

  1. #1
    desert.snake's Avatar
    Join Date
    May 2017
    Location
    Eastern Europe
    Posts
    1,059

    Default 28 W HID lamp base question

    Can anyone help with determining the type of lamp base?

    These lamps were installed in RI-2200
    https://web.archive.org/web/20060704...etail.php?pi=1



    Here is a photo of the lamp of interest, first next to the car lamp and separately. I did not find any summary table on the types of lamp bases, except for the most common ones.




    Last edited by desert.snake; 02-28-2021 at 04:06 AM.

  2. #2
    Flashaholic* XeRay's Avatar
    Join Date
    Feb 2006
    Location
    Ogden, Utah
    Posts
    1,283

    Default Re: 28 W HID lamp base question

    Quote Originally Posted by desert.snake View Post
    Can anyone help with determining the type of lamp base? These lamps were installed in RI-2200
    https://web.archive.org/web/20060704...etail.php?pi=1
    Here is a photo of the lamp of interest, first next to the car lamp and separately. I did not find any summary table on the types of lamp bases, except for the most common ones.
    This is some Chinese made special bulb base, It is a base only for that light, its a proprietary base.
    Unless they still make it and likely not cheap, you likely wont find it anywhere else.

    Here is more info below, this light is from 15 years ago.

    https://www.candlepowerforums.com/vb...=1#post1025531
    Last edited by XeRay; 03-01-2021 at 12:46 PM.

  3. #3
    desert.snake's Avatar
    Join Date
    May 2017
    Location
    Eastern Europe
    Posts
    1,059

    Default Re: 28 W HID lamp base question

    Thank you very much!

    Is there information on what exactly this base is called? After all, there is a certain industrial standard according to which electrical equipment is produced.

    It is made of very high quality, I have 1 piece, a friend bought it used and put new 18650s instead of the old ones. I bought from him.


  4. #4
    Flashaholic* XeRay's Avatar
    Join Date
    Feb 2006
    Location
    Ogden, Utah
    Posts
    1,283

    Default Re: 28 W HID lamp base question

    Nope that's a 1-off base, never seen anything even similar to that. I doubt there is any standard nomenclature associated with it.
    It is a proprietary base.

  5. #5
    desert.snake's Avatar
    Join Date
    May 2017
    Location
    Eastern Europe
    Posts
    1,059

    Default Re: 28 W HID lamp base question

    Understood, then I'll take a closer look, maybe this is something like a holder for some of the standard lamps. That is, it is inserted with the rear end inward of base and then soldered from above to this rod from the side.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •