The Fenix-Store        
Results 1 to 15 of 15

Thread: Delving into LEP

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Delving into LEP

    I just got my first commercial LEP flashlight today. It is the Weltool W4 manufacturer rated at 1782Kcd. I tested it and got a result of 1643Kcd. Thatís pretty close to spec. It is an amazing performer intensity wise. Iím not as enamored with how narrow the beam is though. And the beam is very very uneven color wise. It is bluish in the center and more yellow towards the edge. Itís yucky to look at. The color rendering is rather atrocious as well. My engineering goals are going to be improving LEP in all these areas. Wider beam, more consistent color, and better color. Oh yeah. And one more thing. More power.

  2. #2
    Flashaholic*
    Join Date
    Mar 2013
    Location
    Malaysia
    Posts
    1,056

    Default Re: Delving into LEP

    What about heat? Any concerns that the LEP can overheat like an LED?

  3. #3
    Flashaholic
    Join Date
    Sep 2012
    Location
    CNY
    Posts
    279

    Default Re: Delving into LEP

    I have an Acebeam W30, nice light but compared to my Deft-x a little too blue. Looking forward to what improvements you can get from the current offerings.
    Life is all about having the very best lights.

  4. #4
    Flashaholic* adamlau's Avatar
    Join Date
    Dec 2007
    Location
    Los Angeles
    Posts
    2,406

    Default Re: Delving into LEP

    The rotary UI of the JetBeam/Astrolux models is something I would like to see being offered also.

  5. #5

    Default Re: Delving into LEP

    Quote Originally Posted by Devildude View Post
    I have an Acebeam W30, nice light but compared to my Deft-x a little too blue. Looking forward to what improvements you can get from the current offerings.
    Yeah I may be biased but given the poor beam characteristics of the W4 Iíd rather have the DEFT-X with less overall throw and the cleaner colors and wider beam. Hopefully I can fix this. I already have a higher CRI laser light engine. I donít know yet if I can incorporate it in this platform though.

  6. #6
    Flashaholic* adamlau's Avatar
    Join Date
    Dec 2007
    Location
    Los Angeles
    Posts
    2,406

    Default Re: Delving into LEP

    Quote Originally Posted by saabluster View Post
    ... Iíd rather have the DEFT-X with less overall throw and the cleaner colors and wider beam.
    Agreed. And why I opted for the Atrolux WP2 to replace the W4 I passed along: Less overall throw, but with a nicer tint and slightly wider beam.

  7. #7

    Default Re: Delving into LEP

    Quote Originally Posted by adamlau View Post
    Agreed. And why I opted for the Atrolux WP2 to replace the W4 I passed along: Less overall throw, but with a nicer tint and slightly wider beam.
    I will check it out. Thanks. I have spent the last couple hours tearing this light down. They sure didnít make this easy.

  8. #8

    Default Re: Delving into LEP

    Quote Originally Posted by newbie66 View Post
    What about heat? Any concerns that the LEP can overheat like an LED?
    I donít know yet. I have a lot of tests to run on this. Will be busting out the thermal camera and getting shots of the phosphor and other areas. Just running a bit I didnít notice it producing a ton of heat but it did get warm to the touch. That of course could just mean they arenít getting the heat out efficiently. Iíll find out soon enough. What I found in my research years ago was the phosphor was the choke point. It is the weakest link in the chain due to thermal quenching. With lasers you can always add more power.

  9. #9
    Flashaholic* Katherine Alicia's Avatar
    Join Date
    May 2020
    Location
    Central UK.
    Posts
    829

    Default Re: Delving into LEP

    Invest heavily on eye protection first though, it only takes one mistake and you`ll have 2 smoking holes where your retinas used to be!

  10. #10

    Default Re: Delving into LEP

    Quote Originally Posted by Katherine Alicia View Post
    Invest heavily on eye protection first though, it only takes one mistake and you`ll have 2 smoking holes where your retinas used to be!
    Thanks. Years ago I invested in laser glasses of OD 7+. I am very safety conscience. Still these lasers scare me. But I think that is a good thing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •