I've discovered (by mistake last year)
something that should be a Hidden
and Undocumented "Standby Mode"
For the purpose of next explanations
we define this common terminology :
A normal switch click (down < 0.2 s)
will be denote a "Fast Click"
Example: Turning On/Off
A shortly (down for ≈0.2 sec to ≈1 s)
sustained click as a "Short Click"
Example: To Check battery status
anytime when light is on
(and not only at start up)
★ Undocumented ( ?? )
And a longly (down for > 1 sec) one
will be denote as a "Long Click"
Example: Turning on in moonlight
mode or cycling modes
----------- ★ Standby Mode ---------------
This special mode seems intended
to maintenance and preparation of
emergency & safety equipments by
dedicated technician
With flashlight off; Double Click with
pushing down until low power ( red )
led lights on then Fast Click !
Flashlight will light ≈ 4 seconds for
a test with power/battery indicators
(to show you setting/status) prior
to activate his "Standby Mode"
---- With Standby Mode activated ----
Fast Click to show power mode and
battery status for ≈ 1 second and
exit Standby Mode (ready for use)
First Short Click show power mode
and battery status for ≈ 8 seconds
next use to show only battery status
but can do as many times as desired
Long Click to exit Standby Mode and
turn on light from memorised mode
(don't go directly to moonlight mode)
Double Click to exit Standby Mode
and activate Turbo mode
Trible Click to exit Standby Mode
and activate Stroboscope
Standby Mode can be reach from any
moon/low/med/high memorised mode
and Strobe too ( ?? ) with respect to
current memorised mode
Reaching Standby Mode from Turbo
will change the memorised mode for
High mode
------- ★ Optional Location Led ---------
If you try to reach the Standby Mode
from moonlight and releasing switch
for ≈ 1 sec after red led lights on and
then Fast Click you will go to Standby
Mode with an optional Location Led
using Low Mode led (until next click)
Enjoy !
P.s. When experimenting differents
switch clicks combinations i've
obtained a special result which
i remain unable to reproduce or
understand ( maybe #Version )
---------------------------
------- x ----- x --------
---- o ----------- o ---- x = on
---- o ----------- x ---- o = off
------- o ----- o -------
---------------------------
If you experiment similar result
or new undocumented features
Please .. Let us Know ! ( Here )
something that should be a Hidden
and Undocumented "Standby Mode"
For the purpose of next explanations
we define this common terminology :
A normal switch click (down < 0.2 s)
will be denote a "Fast Click"
Example: Turning On/Off
A shortly (down for ≈0.2 sec to ≈1 s)
sustained click as a "Short Click"
Example: To Check battery status
anytime when light is on
(and not only at start up)
★ Undocumented ( ?? )
And a longly (down for > 1 sec) one
will be denote as a "Long Click"
Example: Turning on in moonlight
mode or cycling modes
----------- ★ Standby Mode ---------------
This special mode seems intended
to maintenance and preparation of
emergency & safety equipments by
dedicated technician
With flashlight off; Double Click with
pushing down until low power ( red )
led lights on then Fast Click !
Flashlight will light ≈ 4 seconds for
a test with power/battery indicators
(to show you setting/status) prior
to activate his "Standby Mode"
---- With Standby Mode activated ----
Fast Click to show power mode and
battery status for ≈ 1 second and
exit Standby Mode (ready for use)
First Short Click show power mode
and battery status for ≈ 8 seconds
next use to show only battery status
but can do as many times as desired
Long Click to exit Standby Mode and
turn on light from memorised mode
(don't go directly to moonlight mode)
Double Click to exit Standby Mode
and activate Turbo mode
Trible Click to exit Standby Mode
and activate Stroboscope
Standby Mode can be reach from any
moon/low/med/high memorised mode
and Strobe too ( ?? ) with respect to
current memorised mode
Reaching Standby Mode from Turbo
will change the memorised mode for
High mode
------- ★ Optional Location Led ---------
If you try to reach the Standby Mode
from moonlight and releasing switch
for ≈ 1 sec after red led lights on and
then Fast Click you will go to Standby
Mode with an optional Location Led
using Low Mode led (until next click)
Enjoy !
P.s. When experimenting differents
switch clicks combinations i've
obtained a special result which
i remain unable to reproduce or
understand ( maybe #Version )
---------------------------
------- x ----- x --------
---- o ----------- o ---- x = on
---- o ----------- x ---- o = off
------- o ----- o -------
---------------------------
If you experiment similar result
or new undocumented features
Please .. Let us Know ! ( Here )
Last edited: