HDS Systems        
Results 1 to 5 of 5

Thread: What are your favorite LED emitters, why?

  1. #1

    Default What are your favorite LED emitters, why?

    There are some essential attributes to evaluate emitters, output, runtime, and color rendering... You know super high max outputs usually come from large lights and large batteries, usually at the cost of good runtimes. Max outputs also sacrifice something on color rendering. And methods of producing accurate colors always takes up a few lumens.

    For the best emitter, you might need it to cover all the bases, such as, high output, great tints, high CRI. This is, in fact, very hard to achieve. Some emitters can give parts of what we need, but not all of it. No emitter does everything. So some people tell they like emitters that output a lot of light, donít heat up quickly, even they don't have high CRI. While, other users think high color rendition is much important for choosing a light. Interested to hear what are your favorite emitters, and why?

  2. #2
    *Flashaholic* Poppy's Avatar
    Join Date
    Dec 2012
    Northern New Jersey

    Default Re: What are your favorite LED emitters, why?

    I like the XML2 emitter, in neutral white temperature.

    Due to it having a relatively large foot print, even when focused in a reflector, it gives a relatively large/broad hot spot.
    My Grand Kids call me Poppy

  3. #3

    Join Date
    Nov 2014
    Prescott Az

    Default Re: What are your favorite LED emitters, why?

    SBT90.2 in BLF GT94 and HK90vn for power throw, and in K75vn and MT90 PlusVn and MF05 for throw, and in KR1vn for edc power throw.
    XHP50.2 in EC03 and FT02S and NSX53vn and FW21ProVn and MMU-X3vn for small-medium power.
    Osram W2 in D4V2vn and FW4aVn for power throw edc and D18vn for medium power throw.
    XHP70.2 in MS18vn for massive flood and in MS06vn and X45vn for medium flood.
    XHP35 in R90TSvn for power throw.
    2 Cor 5:6-8

  4. #4
    Join Date
    Feb 2002

    Default Re: What are your favorite LED emitters, why?

    At the moment, I'm pretty well enamored with the 4000K 95 CRI SST-20, which is presumably of the "high R9" variety, that Malkoff is using in their neutral MDC lights and M61N dropins.
    Rosy tint whose CCT seems higher than the 4000K spec.
    It's virtually indistinguishable in appearance(on a white wall) from my original M61N with a XP-G that has exceptional tint, and has served as my standard for judging other emitters for nearly a decade. In actual use, the SST-20 version may give up a bit of contrast, but colors are rendered more deeply and accurately. Much as I generally prefer rosy tints, I think a bit less red, if it corresponds with a bit better color separation, would get it even closer to "perfect".

    On the other side of neutral, with less depth of color, perhaps better contrast, but needing a little dose of that red, the 4500K XHP35 HI in the Zebralight SC64w HI is very good, and has potential for higher output.

    I don't care for high CRI if it includes emitters that lean toward yellow, or especially green(too much in any direction, really), as CRI does not trump tint in terms of visual acuity, which is based on contrast. I have given little weight to CRI until now, and long considered it a misomer due to the huge variation in color representation between lights with identical CRI(consider that incans with "100 CRI" vary drastically with color temp). Having now reached a point with this SST-20 where all else can be practically equal, the difference higher CRI makes can be quite noticeable, though the extent to which that is true is still somewhat dependent on the subject.
    It's hard to make a flat statement when color perception can be subjective(though contrast between colors is not), but the combination of those factors is what shapes my preferences.

    Something smack in the middle of this SST-20 and XHP35 HI would probably have me approaching tint snob nirvana:

    Part of me never wants to see a perfect combination of tint and CRI. When neutrals first became available, I was an instant convert, and immediately dissatisfied with all previous emitters. I think I'd rather nitpick, explore and appreciate the respective advantages of, a variety of them than suddenly be dissatisfied with every light I own again!

  5. #5
    Join Date
    Oct 2013

    Default Re: What are your favorite LED emitters, why?

    My EDC mule is based on a combination of 3x 5000K and 3x 6500K optisolii so it should be around that high noon 5700K cct. This is a great! tint.

    But the perfect one is the pure 6500K one. I am waiting for a quad mcpcb with these leds to arrive and eventually replace the above-mentioned mule

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts