• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

All Sold Reylight Pineapples, EagTac D25LC2 mini, D25LC2, Lumintop Tool AA CU

Msf

Enlightened
Joined
Jul 14, 2016
Messages
262
Location
Virginia
Clearing out some of my lights so I can purchase more, Lol. All of these lights listed have mcpcb and LED swaps (by me) and have all been used for at least several hours on my nightly trail walks. They have also survived my very unscientific drop testing (multiple six foot drops onto a thin rubber mat laid on a concrete floor), so am reasonably confident in the mod work continuing to function properly. Each item has two prices shipped (one if you are good with USPS first class, the other for USPS priority mail). Payment via PayPal desired. As always, first to respond in thread with "I will take it" has precedence over other means of communication.

Sold Lumintop Tool AA Copper – LH351D 4000k
· AA or 14500
· Dimensions: 3.52 x .73 in
· Weight: 2.36 oz
· Please note the light head has an O-ring installed and visible in order to account for additional spacing required with the LH351D installation. Light is still completely water tight.
· 50.00USD shipped via USPS first class or 54.00USD shipped via USPS Priority Mall small flat rate box

Sold EAGTAC D25LC2 Mini TWISTY – Nichia 219c 4000k
· 2xCR123 / 1x18650
· Dimensions : 4.2 x .85 in
· Weight: 1.5 oz
· 50.00USD shipped via USPS first class or 54.00USD shipped via USPS Priority Mall small flat rate box

Sold EAGTAC D25LC2 MKII CLICKY – LH351D 4000k
· 2xCR123 / 1x18650
· Dimensions : 4.5 x .85 in
· Weight: 1.7 oz
· 50.00USD shipped via USPS first class or 54.00USD shipped via USPS Priority Mall small flat rate box

Sold Reylight Brass Pineapple V4 - XPL 4000k
· AA or 14500
· Dimensions: 3.8 x 0.8 in (9.8 x 2.1 cm)
· Weight: 3.3 oz (93 g) without battery
· 50.00USD shipped via USPS first class or 54.00USD shipped via USPS Priority Mall small flat rate box

Sold Reylight Brass Pineapple V4 – LH351D 4000k
· AA or 14500
· Dimensions: 3.8 x 0.8 in (9.8 x 2.1 cm)
· Weight: 3.3 oz (93 g) without battery
· 50.00USD shipped via USPS first class or 54.00USD shipped via USPS Priority Mall small flat rate box
xL98VAMl.jpg

2pbrev1l.jpg

yUnHN4Sl.jpg
 
Last edited:

chadvone

Enlightened
Joined
Nov 23, 2008
Messages
406
Location
IOWA
Re: Reylight Pineapples, EagTac D25LC2 mini, D25LC2, Lumintop Tool AA CU, all modded

I'll take EAGTAC D25LC2 Mini TWISTY – Nichia 219c 4000k
 

chadvone

Enlightened
Joined
Nov 23, 2008
Messages
406
Location
IOWA
Re: Reylight Pineapples, EagTac D25LC2 mini, D25LC2, Lumintop Tool AA CU, all modded

Also do you offer any multi light discounts ?
 

chadvone

Enlightened
Joined
Nov 23, 2008
Messages
406
Location
IOWA
Re: Reylight Pineapples, EagTac D25LC2 mini, D25LC2, Lumintop Tool AA CU, all modded

PP sent for the EAGTAC D25LC2 Mini TWISTY – Nichia 219c 4000k.

Can I get your impressions on the Reylights?
And the Eagtac clickyii
 

Msf

Enlightened
Joined
Jul 14, 2016
Messages
262
Location
Virginia
Re: Reylight Pineapples, EagTac D25LC2 mini, D25LC2, Lumintop Tool AA CU, all modded

The Reylights: the LH351D gives it a very large hotspot and is perfect for use as a working and trail walking light as it lights up a wide area. The XPL has a tighter hotspot and gives a little more range. They work on AA batteries but excel with 14500s if using outdoors. The Reylights are my favorite AA/14500 light and I have several with different LEDs in each. The EagTac clicky with the LH351D provides a wider hotspot than a Nichia or XPL would, but it is still a good thrower due to the reflector size.

PP sent for the EAGTAC D25LC2 Mini TWISTY – Nichia 219c 4000k.

Can I get your impressions on the Reylights?
And the Eagtac clickyii
 

Buck91

Flashlight Enthusiast
Joined
Feb 26, 2007
Messages
1,760
Location
USA
Re: Reylight Pineapples, EagTac D25LC2 mini, D25LC2, Lumintop Tool AA CU, all modded

What's the story with that Eagtac d25lc2? Is this a custom job? I just ask because I haven't seen it with the LH351d at all. If so do you have the binning one that led? Seems like 3500-4000 is the sweet spot where any cooler starts getting too far above BBL for me.
 

Msf

Enlightened
Joined
Jul 14, 2016
Messages
262
Location
Virginia
Re: Reylight Pineapples, EagTac D25LC2 mini, D25LC2, Lumintop Tool AA CU, all modded

What's the story with that Eagtac d25lc2? Is this a custom job? I just ask because I haven't seen it with the LH351d at all. If so do you have the binning one that led? Seems like 3500-4000 is the sweet spot where any cooler starts getting too far above BBL for me.
4000k, don't know the bin. Purchased LED already mounted on a MCPCB by MtnElectronics and then did the swap myself. Compared to the XPL that was in it originally, it has a much larger hotspot. Whitewall wise, if I shine it on low versus my Nichia of the same model, the LH351D has the faintest green tinge at the edges in side by side comparison. I can't see that tinge when not comparing to another light alongside it. On medium and above , that tinge disappears completely.
 

Buck91

Flashlight Enthusiast
Joined
Feb 26, 2007
Messages
1,760
Location
USA
Re: Reylight Pineapples, EagTac D25LC2 mini, D25LC2, Lumintop Tool AA CU, all modded

Thank you. Going to pass on this one, I haven't loved the LH351D emitters from mtn in the past.
 

chadvone

Enlightened
Joined
Nov 23, 2008
Messages
406
Location
IOWA
Re: Reylight Pineapples, EagTac D25LC2 mini, D25LC2, Lumintop Tool AA CU, all modded

Light received. Thank You
 

chadvone

Enlightened
Joined
Nov 23, 2008
Messages
406
Location
IOWA
Re: Reylight Pineapples, EagTac D25LC2 mini, D25LC2, Lumintop Tool AA CU, all modded

Tried to PM you. Your Inbox is full.
 
Top