Sold/Expired SOLD: McLuxPR Heads DB1200s LuxIII "T" Bins (2)

SOLD: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

For Sale one bare aluminum McLuxPR head running a custom DB1200 (actually 1194) with a TV0J and one black anodized McLuxPR head running a custom DB1250 with a TV1J. These are new, freshly built. Have less than 10min runtime on them. Runs on 2x123 or 3x123.

These suckers are bright and white, nice color tints. However the black head only when shown on a white wall, a very slight tinge of purple can be seen (pictured below) if you really look for it. Other than a white wall, not noticeable. Both have been tested and run fine on 3x123. Although calculated to be 1194 and 1250, current measured at the emitter on the DB1194 was in the high 1.2A range! The DB1250 read in the mid 1.3A range! The DB1250 does look a bit brighter than the DB1194 but just barely and hard to tell. For a beamshot comparison against a DB917 TWAK and a DB1000 TW0K, look here.

BOTH SOLD
$115ea. shipped. International extra.
Paypal (cash) please.
Please post here to stake your claim if interested.


Left: DB1194 TV0J, Right: DB1250 TV1J





Thanks

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

How does the polished aluminum one look on a E2e-GM/SG?
Do you (or anyone else) have a nice pict showing that?

PM sent as well

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

PM sent.

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

BLG, sorry I don't have a E2e-GM/SG to take a picture with but there is one here.

Sorry not really interested in trades on these. PMs replied.

thx

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

Interested in the Bare Aluminum head if it hasn't been taken yet.

PM Sent.

Edit: Paypal Sent

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

DB1200 Bare Aluminum Head SOLD, DB1250 Black Head still available.

Thanks

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

Hi Darkzero...

I`ll take the DB1250 Black Head. Please send me a PM with your email address, and I`ll send a cash Paypal payment to you.

Thanks!

/ubbthreads/images/graemlins/smile.gif

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

Paypal sent.

Thanks, Darkzero! /ubbthreads/images/graemlins/thumbsup.gif

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

Thanks FOCD and Carpe! They'll both leave here on Monday and the D/C #s will be PM'd too you guys.

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

Carpe, did you receive it? Just checking.

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

Darkzero...

So sorry! /ubbthreads/images/graemlins/ohgeez.gif

Yes, I did receive the head a couple of days ago. I haven`t fired it up yet, but will do so tonight. /ubbthreads/images/graemlins/tongue.gif /ubbthreads/images/graemlins/smile.gif

(I`ve been busy these last couple of days trying to hide out from the Revenue Agents...but unfortunately they found me.) /ubbthreads/images/graemlins/rolleyes.gif /ubbthreads/images/graemlins/help.gif /ubbthreads/images/graemlins/jpshakehead.gif

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

Well you already know I got mine, but I just thought I'd post a thank you.

The light has noticably more sidespill up close, and when I light up some tree lines out back it out punching the 917 by a bit too. A great little addition to my collection. /ubbthreads/images/graemlins/smile.gif

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

[ QUOTE ]
Carpe Diem said:
Darkzero...

So sorry! /ubbthreads/images/graemlins/ohgeez.gif

Yes, I did receive the head a couple of days ago. I haven`t fired it up yet, but will do so tonight. /ubbthreads/images/graemlins/tongue.gif /ubbthreads/images/graemlins/smile.gif

(I`ve been busy these last couple of days trying to hide out from the Revenue Agents...but unfortunately they found me.) /ubbthreads/images/graemlins/rolleyes.gif /ubbthreads/images/graemlins/help.gif /ubbthreads/images/graemlins/jpshakehead.gif

[/ QUOTE ]

No apologies needed. I was just curious is all. You don't see to many of these and I was just wondering what you thought about it, no rush.

LOL, well not laughing that they found you. Funny how you were playing hinde and seek, I've done that. Sorry the agents found you. I hope everything will be ok.

F.OCD, I'm very glad you like it. I hope it was a nice addition to your collection. I know mine was.

Thanks again fellas.

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

Hi Darkzero...

Just tried it out. What a great light!

Thank you so much.

/ubbthreads/images/graemlins/smile.gif /ubbthreads/images/graemlins/tongue.gif /ubbthreads/images/graemlins/thumbsup.gif

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

darkzero, are those Wayne Y's bare emitter boards I see?

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

Yes, those are the PM emitter boards. They are included with all McLuxPR heads and PM6 McModules. Not necessarily needed for the builds but makes life easier.

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

Thanks..thought so. They look like they make centering a lot easier.

BTW....looks like high quality work....

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

Hi again Darkzero...

I put the Black DB1250 on one of Doug Speck`s brass 3-cell UBH`s, with a Z57 tailcap. It looks beautiful, and works great.

A new work of flashaholic art...
Thanks to you and Doug. /ubbthreads/images/graemlins/smile.gif /ubbthreads/images/graemlins/thumbsup.gif


PS: I`ve got more brass UBH`s. If you ever make any more if these great DB1250 heads, please let me know! /ubbthreads/images/graemlins/tongue.gif /ubbthreads/images/graemlins/help.gif /ubbthreads/images/graemlins/grin.gif

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

Carpe, glad you like it. /ubbthreads/images/graemlins/thumbsup.gif

UBH and brass. /ubbthreads/images/graemlins/drool.gif I'm still waiting for mine, not brass though.

Yes I will make more of these. I actually just finished a DB1194 for someone last night. I'll PM you sometime this next coming week in regards to another.

Remember, as I mentioned before, if the slight purple hue bothers you any I'll swap the emitter out for whatever LuxIII you provide for free. It's really not bad at all but it is not perfect.

Talk to ya soon

Re: FS: McLuxPR Heads DB1200s LuxIII \"T\" Bins (2)

[ QUOTE ]
Carpe Diem said:
If you ever make any more if these great DB1250 heads, please let me know! /ubbthreads/images/graemlins/tongue.gif /ubbthreads/images/graemlins/help.gif /ubbthreads/images/graemlins/grin.gif

[/ QUOTE ]

Carpe PM sent.