McLux Zebra Head / DB917 / TWOL / SO17XA Reflector--$85
Another scanner shot-(I've got to buy a camera!)-White specks are dust, not scratches.
<font color="red">SOLD </font>
This started out as a McLux Bead Blasted Black head. When it arrived, I took it
out of the packing to check it out and promptly dropped it on the floor. It now had a
nice scratch on the bead blasted finish. A little 400 grit sandpaper, a few minutes of work,
and the Zebra Head is born. The finish was taken off the outer perimeter only
(down to bare aluminum), leaving the black bead blasted finish on the inside of the
cooling fins. The bezel remains stock black finish. This head is built with an E-Can
instead of standard Mclux cathode assembly. Looks great on a black or EN plated body.
Nice smooth white beam--tested with 2x123 and 3x123 bodies. <font color="red"> SOLD </font>
Another scanner shot-(I've got to buy a camera!)-White specks are dust, not scratches.
<font color="red">SOLD </font>
This started out as a McLux Bead Blasted Black head. When it arrived, I took it
out of the packing to check it out and promptly dropped it on the floor. It now had a
nice scratch on the bead blasted finish. A little 400 grit sandpaper, a few minutes of work,
and the Zebra Head is born. The finish was taken off the outer perimeter only
(down to bare aluminum), leaving the black bead blasted finish on the inside of the
cooling fins. The bezel remains stock black finish. This head is built with an E-Can
instead of standard Mclux cathode assembly. Looks great on a black or EN plated body.
Nice smooth white beam--tested with 2x123 and 3x123 bodies. <font color="red"> SOLD </font>
