Angryfox        
Results 1 to 2 of 2

Thread: ARC 4+ technical question

  1. #1
    Flashaholic* Connor's Avatar
    Join Date
    Oct 2002
    Location
    Germany
    Posts
    658

    Default ARC 4+ technical question

    Hi *@*,

    I consider myself very lucky that I could get a new ARC 4+ today. Everything is perfect so far, I noticed just one thing I would like an explanation for out of technical curiosity. .)

    My ARC is set as follows: primary 3, secondary 7, force primary OFF, RFS ON

    When I press and hold the button on lvl 3, the ARC goes to lvl 1. When I let go of the switch, it doesn't always return to lvl 3 at once, but with a slight delay (~200ms). This happens maybe 30% of the time.

    This does not happen when I go to full power and back from lvl 7 or lvl 16. Is this normal? I would be very pleased if someone could check this with his ARC.

    Any technical reason for this maybe?

    Thanks,

    Connor

  2. #2
    Flashaholic*
    Join Date
    Jan 2004
    Location
    LA
    Posts
    498

    Default Re: ARC 4+ technical question

    mine does somthing similar... the lights were works in progress so all bugs were not sorted.

    it could be just a bit of bleed time to the circuit to drain to the lower level.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •