Anglepoise
Flashlight Enthusiast
Found this great page with all the info on the QIII any moder might need. Great pics and instructions on removing the bezel.
Nuwai QIII strip down
Nuwai QIII strip down
Nuwai QIII totally dismantled.......with pictures.
- Thread starter Anglepoise
- Start date
Help Support Candle Power Flashlight Forum
E
EchoSierraTwo
Guest
Cool. Kinda dismantles like my Xenon Dorcy. Thx
idleprocess
Flashaholic
Looks like the star PCB doesn't habe much contact with that (aluminum?) spacer, which doesn't look to be in contact with much anything else...
koala
Flashlight Enthusiast
Re: Nuwai QIII totally dismantled.......with pictu
Looks like a Zetex circuit to me.
Looks like a Zetex circuit to me.
Re: Nuwai QIII totally dismantled.......with pictu
I thought that this was already mentioned in the thread discussing Cones' review of the Q-III. /ubbthreads/images/graemlins/grin.gif It's supposed to be a Zetex, and changing the Lux out really DOes improve performance a lot.
I thought that this was already mentioned in the thread discussing Cones' review of the Q-III. /ubbthreads/images/graemlins/grin.gif It's supposed to be a Zetex, and changing the Lux out really DOes improve performance a lot.
Neg2LED
Flashlight Enthusiast
Re: Nuwai QIII totally dismantled.......with pictu
Kewl!
looks like a good way to change the lux in a greenish one out or pop in a brighter lux....
neg
Kewl!
looks like a good way to change the lux in a greenish one out or pop in a brighter lux....
neg
Longbow
Enlightened
Re: Nuwai QIII totally dismantled.......with pictu
I guess many of the Q-III lights ship with "colored" LuxIII's.
I guess many of the Q-III lights ship with "colored" LuxIII's.
Re: Nuwai QIII totally dismantled.......with pictu
Most of them seem to be blue tinted or yellow-tinted, in both my experience and from what I've seen in these threads. Unfortunately, as it has been stated before, comparing Luxeon lights is a losing proposition for the people doing the comparing - as it looks really white until the moment you put another Luxeon light by it.
And you -do- play the lottery when you get a Q-III or a Micra, though the lottery's not quite as bad as it used to be, at least among the LuxIII LEDs. LuxI and LuxV is where the ranges tend towards extremes, though not towards 'cat-urine green' as much as it once was.
Most of them seem to be blue tinted or yellow-tinted, in both my experience and from what I've seen in these threads. Unfortunately, as it has been stated before, comparing Luxeon lights is a losing proposition for the people doing the comparing - as it looks really white until the moment you put another Luxeon light by it.
And you -do- play the lottery when you get a Q-III or a Micra, though the lottery's not quite as bad as it used to be, at least among the LuxIII LEDs. LuxI and LuxV is where the ranges tend towards extremes, though not towards 'cat-urine green' as much as it once was.
L
LITEmania
Guest
Re: Nuwai QIII totally dismantled.......with pictu
Haesslich :
Lately I opened two of Q-III head and found SW0K and SX0J.
Instead of boiling Q-III in water, I heat it up with hair dryer for 5 minutes.
...and my wife left my room in a hurry... /ubbthreads/images/graemlins/icon15.gif
Haesslich :
Lately I opened two of Q-III head and found SW0K and SX0J.
Instead of boiling Q-III in water, I heat it up with hair dryer for 5 minutes.
...and my wife left my room in a hurry... /ubbthreads/images/graemlins/icon15.gif
Anglepoise
Flashlight Enthusiast
Re: Nuwai QIII totally dismantled.......with pictu
Some additional info. The lens is plastic ( no surprise there ) and is 1.5 mm thick and 22.0 mm in diameter. I tried a hair dryer and the boiling water and neither worked.
Gentle use of the flame got the job done right away and all the epoxy was removed with lacquer thinner.
Very well made and machined inside.
Some additional info. The lens is plastic ( no surprise there ) and is 1.5 mm thick and 22.0 mm in diameter. I tried a hair dryer and the boiling water and neither worked.
Gentle use of the flame got the job done right away and all the epoxy was removed with lacquer thinner.
Very well made and machined inside.
3rd_shift
Flashlight Enthusiast
Re: Nuwai QIII totally dismantled.......with pictu
[ QUOTE ]
Unregulated said:
I guess many of the Q-III lights ship with "colored" LuxIII's.
[/ QUOTE ]
Colored luxeon3's...
Now that could be an interesting mod.
Just pop in a green, cyan, blue, or /ubbthreads/images/graemlins/wow.gif royal blue star. /ubbthreads/images/graemlins/cool.gif
[ QUOTE ]
Unregulated said:
I guess many of the Q-III lights ship with "colored" LuxIII's.
[/ QUOTE ]
Colored luxeon3's...
Now that could be an interesting mod.
Just pop in a green, cyan, blue, or /ubbthreads/images/graemlins/wow.gif royal blue star. /ubbthreads/images/graemlins/cool.gif
L
LITEmania
Guest
Re: Nuwai QIII totally dismantled.......with pictu
like this...Q-III with PB09 (M1K) /ubbthreads/images/graemlins/cool.gif
like this...Q-III with PB09 (M1K) /ubbthreads/images/graemlins/cool.gif
Re: Nuwai QIII totally dismantled.......with pictu
Now that's a nice colored Luxeon. /ubbthreads/images/graemlins/wink.gif
Note to self: talk with Orb about that RB module, and maybe that RB LuxV... that'd be kinda cool.
Now that's a nice colored Luxeon. /ubbthreads/images/graemlins/wink.gif
Note to self: talk with Orb about that RB module, and maybe that RB LuxV... that'd be kinda cool.
L
LITEmania
Guest
Re: Nuwai QIII totally dismantled.......with pictu
Haesslich
Do you know what BIN was used ArcUV ?
Once I saw from my visitor that the ArcUV lite has a 1W Low-dome ? As far as I know, there is no UV luxeon in the market ?????
Haesslich
Do you know what BIN was used ArcUV ?
Once I saw from my visitor that the ArcUV lite has a 1W Low-dome ? As far as I know, there is no UV luxeon in the market ?????
