• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired Hotlips-C and D heatsinks. Both available.

hotbeam

Flashlight Enthusiast
Joined
Jan 2, 2003
Messages
1,737
Location
Melb, AU
In line with the 200+ post thread closure notice, I am starting a new thread in the right forum, that is... here.

A small bit of background. The first and original Hotlips heatsink project for the popular D sized (OAD) flashlight was started between myself and Rothrandir back before June 2003. Back then, this forum (Custom & Mod B/S/T) had not even been created yet! /ubbthreads/images/graemlins/grin.gif The thread has seen the introduction of the Hotlips-C, the Sleeve and the pre-fitted LuxeonIIIs and LuxeonVs' on the Hotlips for simplier modding, ie. Hotlips-C/D #3 and #5.

The contents from the first post from that thread is below. The ORIGINAL HOTLIPS THREAD can be found HERE.
 

hotbeam

Flashlight Enthusiast
Joined
Jan 2, 2003
Messages
1,737
Location
Melb, AU
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE ***

MEET THE FAMILY:
-----------------------
Hotlips-D NEXGEN:
This is a version 3 of the popular original Hotlips heatsink. Fits the ~34mm OAD (Ontario Aluminium) body snugly. Note the chunkier lips /ubbthreads/images/graemlins/grin.gif

Hotlips-C NEXGEN:
This is the version 3 heatsink for a NEWER C-sized OA, ie OAC, with serial # starting with C. The OD of the heatsink is ~26mm. The bottom recess is large enough to fit the Ecan (available from the Shoppe) comfortably.

Sleeve:
The Sleeve will take the ~26mm diam Hotlips-C to ~28mm to fit snugly into older OACs.
*** This item is no longer offered for sale. Instead it will be given away for free and included with your order if you specify that you have an older OAC. You will most likely need to freeze/heat the Hotlips-C and Sleeve combination to make the complete heatsink for your older OACs. Available whilst stocks last.


FORMAT:
-----------------------
Hotlips-D and Hotlips-C will also be available in Configuration #3 and Configuration #5. Config #3 being the LuxeonIII mating (LuxIII epoxied to the Hotlips) and Config #5 being the LuxeonV mating (LuxV epoxied to the Hotlips).

LuxeonBinningColourChart.gif


COST:
-----------------------
<ul type="square">
[*]Hotlips-D is $14 ea.
[*]Hotlips-C is $14 ea.
[*]The Sleeve is $2 ea. *** The Sleeves are now free with your Hotlips-C NEXGEN ***
[*]Hotlips-C or Hotlips-D Config #3 (Luxeon III, current bin is TX1K) is $32 ea.
[*]Hotlips-C or Hotlips-D Config #5 (Luxeon V, current bin is VX1T) is $49 ea.
[/list]
Postage is $6 for up to a total of 6 Hotlips to North America. $7.00 to the UK and EU. A$5 in Australia.

If you want insurance, please add $5 for insured value to $50. Add $2 for additional $50 insured value.
Eg. To insure for $92, add $5+2=$7 to the total. To insure for $150, add $5+2+2= $9 to the total.

Because the items are sent via regular Air Mail, there is no tracking facilities available.


Please send non credit card Paypal or positive balance Paypal to nonCC(@)howardtee.com. If paying by CC Paypal, the prices are $14.50, $33.40 and $50.90 respectively. Send CC Paypal to howard(@)howardtee.com. There is no change in the postage rate. Kindly itemise your order and include your CPF handle. Any questions, feel free to email me /ubbthreads/images/graemlins/smile.gif or ask here.


FITMENT GUIDE:
-----------------------
Hotlips-D
Black body: snug (need sanding of the ID of the OAD opening)
Silver body: snug (need sanding of the ID of the OAD opening)
Red body: perfect
Blue body: perfect
Green: perfect
Pewter: perfect

Hotlips-C
Black body: perfect
Silver body: perfect
Pewter body: perfect

Hotlips-C with Sleeve
Black body: perfect
Silver body: perfect


<font color="red">
***************
HOTLIPS SPECIAL - MAY 2, 05 to MAY 15, 05 - CLOSED
***************
</font>

For any CPFer who has previously bought a Hotlips heatsink from me directly, you will get a FREE Hotlips-C or Hotlips-D if you order 3 heatsinks. That is, pay for 3 and get 1 extra one free. $48 for any 4 Hotlips ordered, using non CC Paypal (or $49.50 for CC Paypal), shipped to you ANYWHERE.

For any Hotlips newbies, as an enticement, you will also get a free Hotlips-C or Hotlips-D if you order 3 heatsinks. How good is that!

This offer will end on the weekend of Dec 11th-12th so that your order will arrive before Christmas. Given Christmas mail is usually delayed closer to the day, you should order well before the end of this offer to make sure it does get to you in time.

Go forth and mod(ify) /ubbthreads/images/graemlins/grin.gif /ubbthreads/images/graemlins/party.gif

/ubbthreads/images/graemlins/paypal.gif /ubbthreads/images/graemlins/paypal.gif

Paypal details are available in the first post.

<font color="red">
***************
HOTLIPS SPECIAL - MAY 2, 05 to MAY 15, 05 - CLOSED
***************
</font>



hotlips_family.jpg



hotlipsD1b.jpg


hotlipsD1-conf1.jpg


hotlipsD1-conf2.jpg



Here are some pics of the hotlips going into the Mag. Note that I have not removed the switching mechanism to remove the bulb holder. When that is done, the hotlips will simply drop in (without needing any force as the picture shows).

hotlipsDinMag1a.jpg

Standard D size mag, serial # D3023884521

hotlipsDinMag1b.jpg

Hotlips dropped in (without removing bulb holder)

hotlipsDinMag1c.jpg

Hotlips pushed in to show the level of the heatsink relative to the rim of the Mag -- flush!! /ubbthreads/images/graemlins/smile.gif.
 

hotbeam

Flashlight Enthusiast
Joined
Jan 2, 2003
Messages
1,737
Location
Melb, AU
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE ***

Just checked stocks... plenty of Hotlips are still available for OAC and OAD mods.
 

MenaceSQL

Enlightened
Joined
May 28, 2003
Messages
319
Location
Georgia
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE ***

/ubbthreads/images/graemlins/paypal.gif /ubbthreads/images/graemlins/bump.gif /ubbthreads/images/graemlins/grinser2.gif
 

hotbeam

Flashlight Enthusiast
Joined
Jan 2, 2003
Messages
1,737
Location
Melb, AU
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE ***

Got it Menace. Thanks /ubbthreads/images/graemlins/smile.gif Emailed you.
 

hotbeam

Flashlight Enthusiast
Joined
Jan 2, 2003
Messages
1,737
Location
Melb, AU
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE ***

EM sent Stuartr
 

UncleFester

Flashaholic*,
Joined
Apr 28, 2004
Messages
1,271
Location
Desert Hlls,AZ
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE *

/ubbthreads/images/graemlins/paypal.gif for 2 Hotlips C and one sleeve
Thank You
Edit: Could I please be notified when these ship? Thanks
 

hawgorn

Newly Enlightened
Joined
Sep 17, 2004
Messages
16
Location
Finland
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE *

Do you still have Config #3 in D? I'd like one.
 

hotbeam

Flashlight Enthusiast
Joined
Jan 2, 2003
Messages
1,737
Location
Melb, AU
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE *

Yep, I can make one for you.
 

hawgorn

Newly Enlightened
Joined
Sep 17, 2004
Messages
16
Location
Finland
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE *

/ubbthreads/images/graemlins/paypal.gif sent for one Hotlips-D #3
 

hotbeam

Flashlight Enthusiast
Joined
Jan 2, 2003
Messages
1,737
Location
Melb, AU
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE *

In the mail to you as I type.... /ubbthreads/images/graemlins/smile.gif Thanks
 

SwitchedON

Newly Enlightened
Joined
Feb 21, 2005
Messages
3
Location
Chicagoland
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE ***

Paypal sent for one Hotlips-C NEXGEN.

Great looking heatsink!

Kevin
 

hotbeam

Flashlight Enthusiast
Joined
Jan 2, 2003
Messages
1,737
Location
Melb, AU
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE ***

<font color="red">
***************
HOTLIPS SPECIAL - MAY 2, 05 to MAY 15, 05
***************
</font>

For any CPFer who has previously bought a Hotlips heatsink from me directly, you will get a FREE Hotlips-C or Hotlips-D if you order 3 heatsinks. That is, pay for 3 and get 1 extra one free. $48 for any 4 Hotlips ordered, using non CC Paypal (or $49.50 for CC Paypal), shipped to you ANYWHERE.

For any Hotlips newbies, as an enticement, you will also get a free Hotlips-C or Hotlips-D if you order 3 heatsinks. How good is that!

Go forth and mod(ify) /ubbthreads/images/graemlins/grin.gif /ubbthreads/images/graemlins/party.gif

/ubbthreads/images/graemlins/paypal.gif /ubbthreads/images/graemlins/paypal.gif

Paypal details are available in the first post.

<font color="red">
***************
HOTLIPS SPECIAL - MAY 2, 05 to MAY 15, 05
***************
</font>
 

hotbeam

Flashlight Enthusiast
Joined
Jan 2, 2003
Messages
1,737
Location
Melb, AU
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE ***

MN, your Hotlips-C+S will be shipped to HI today.
 

VWTim

Enlightened
Joined
Sep 7, 2004
Messages
822
Location
Corvallis (OSU)
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE *

How will the TX1K in the config #3 work being DD'd off of 3 D Alkalines? I'm working on my first mag mod. I've seen a L Vf being recommened, will the K be too low for my use?
thanks in advance,
Tim
 

hotbeam

Flashlight Enthusiast
Joined
Jan 2, 2003
Messages
1,737
Location
Melb, AU
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE *

No problems at all DD'ing the TX1K with 3 alkalines. The problem is heat dissipation rather than over voltage. The Hotlips-C in OAC body does a great job
 

VWTim

Enlightened
Joined
Sep 7, 2004
Messages
822
Location
Corvallis (OSU)
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE *

Excellent, I'll be sending some payment first of next week after payday. thanks for the rapid response.
Tim
 

hawgorn

Newly Enlightened
Joined
Sep 17, 2004
Messages
16
Location
Finland
Re: Hotlips-C and D heatsinks. *** ALL AVAILABLE *

Received mine today. Thanks a bunch.
 
Top