WildRice
Flashlight Enthusiast
Awhile ago I modded a teal LUX I with a top from a 10mm LED,It was OK, but I recientally got a bunch of acrilyc spherical optics from the Shoppe. The 3/8" optic fits right on top if the dorcy head( which is glued around the edge with 5min epoxy) and focuses NICELY on a LUX mounted on the driver board. Since I already had A LUX I on a simulated dorcy board I decided to take off the 10mm head. Well the WHOLE thing came off, tacky gunk and all, but I did it slow enough that the wires stayed in-tact. I topped it off bu putting some orance glow-poxy in the channel around the cup for the LED die.
On a fresh battery (AAA Li-ion) it pulls 1.2A and after some intermittent use sits around 900mA. I got a bunch of these teal LUX I's for about $4 each, and it hase some sinking to the case, Which gets warm quick. The wall shot is from about 12 feet.
Jeff
On a fresh battery (AAA Li-ion) it pulls 1.2A and after some intermittent use sits around 900mA. I got a bunch of these teal LUX I's for about $4 each, and it hase some sinking to the case, Which gets warm quick. The wall shot is from about 12 feet.
Jeff