cgpeanut
Enlightened
I have 5 TWOH POP2 V2.31 and 2 TYOH POP2 V2.31 Sammies or POP2 JiL PiLs the TYOH are in their original Star Slug and i will include them with the POP2 v2.31 if desired.
$59.95 shipped anywhere, First to say "I'll take it" gets it.
NOTE 1: I will not be responsible for lost or damage mail.
NOTE 2: Change of paypal information.
Regular paypal address: [email protected]
CC Funded paypal please add 4%: [email protected]
Here's the POP2 v2.31 Video in Action
power ON#1 -> low brightness
This brightness is settable by the user.
power OFF
power ON#1, OFF, ON#2 -> high brightness
This is max brightness.
power OFF
power ON#1, OFF, ON#2, OFF, ON#3 -> low brightness setting mode
After a short flick of light followed by short delay, the brightness goes up from min to max and down from max to min repeatedly.
power OFF
The last brightness before power OFF is now set as the new low brightness level.
power ON#1 -> low brightness
The new low brightness is the same brightness before power OFF during the brightness setting mode.
power OFF
power ON#1, OFF, ON#2, OFF, ON#3, OFF, ON#4 -> strobe mode
It may appear very irregular strobe, but it is not. There are many missing flash frame due to the frame rate conversion and the short pulse duration of strobe.
power OFF
Here's how to assemble the JiL Pil in your stock JiL DD (up) no soldering required /ubbthreads/images/graemlins/smile.gif
$59.95 shipped anywhere, First to say "I'll take it" gets it.
NOTE 1: I will not be responsible for lost or damage mail.
NOTE 2: Change of paypal information.
Regular paypal address: [email protected]
CC Funded paypal please add 4%: [email protected]
Here's the POP2 v2.31 Video in Action
power ON#1 -> low brightness
This brightness is settable by the user.
power OFF
power ON#1, OFF, ON#2 -> high brightness
This is max brightness.
power OFF
power ON#1, OFF, ON#2, OFF, ON#3 -> low brightness setting mode
After a short flick of light followed by short delay, the brightness goes up from min to max and down from max to min repeatedly.
power OFF
The last brightness before power OFF is now set as the new low brightness level.
power ON#1 -> low brightness
The new low brightness is the same brightness before power OFF during the brightness setting mode.
power OFF
power ON#1, OFF, ON#2, OFF, ON#3, OFF, ON#4 -> strobe mode
It may appear very irregular strobe, but it is not. There are many missing flash frame due to the frame rate conversion and the short pulse duration of strobe.
power OFF
Here's how to assemble the JiL Pil in your stock JiL DD (up) no soldering required /ubbthreads/images/graemlins/smile.gif