Justintoxicated
Flashlight Enthusiast
Ok Guys, so I have a fairly large project I will be completing very soon, ad I needed some Help with ideas.
This is NOT for a flashlight but for lights on my ATV. Yes I already have Luxeons all over my ATV, regulated off LM317T's and a AC to DC Rectifier Regulator I made for my original ATV Project.
I'm half finished already with this one. Although I am waiting for a new stator before I can run the ATV. Basically I have floated the ground on the Stator and have purchase a full wave rectifier/regulator from a company called Trailtech.
These will be released in the next few weeks so I will be purchasing 4 of them.
http://www.trailtech.net/eclipse_mr16.htm
I already have purchased this Rectifier and Battery.
http://www.trailtech.net/dc_conversion.htm
PART #: 040-BATT4.5
PART #: 7002-RR150
I know how to hook these up already.
So my ground is floated and I basically have DC Power. My Friend welded me up a battery box to hold the battery which is already mounted to my frame and I will be using Ensulite Foam to help isolate the battery from vibration and impact.
Will be using either 1 of these switches per light or per pair depending on how much current these HID's pull while warming up http://store.maxdy.com/swledrkbl.html
They will be mounted to my radiator cover in front of the handle bars.
So what's left?
I need help finding
a small Fused Distro block that is about 3 inches x 4 inches with 5 or 6 outputs (I'll get measurements tonight)
a lighted primary switch that can handle 20-30 amps.
Or, some type of Circuit that can be epoxied to the battery box (before painting it) that can house a 1 watt Luxeon LED driven at 150ma efficiently.
The Lux would be wired parallel with the switches output line. Circuit would need to be fairly efficient and cheap.
This is NOT for a flashlight but for lights on my ATV. Yes I already have Luxeons all over my ATV, regulated off LM317T's and a AC to DC Rectifier Regulator I made for my original ATV Project.
I'm half finished already with this one. Although I am waiting for a new stator before I can run the ATV. Basically I have floated the ground on the Stator and have purchase a full wave rectifier/regulator from a company called Trailtech.
These will be released in the next few weeks so I will be purchasing 4 of them.
http://www.trailtech.net/eclipse_mr16.htm
I already have purchased this Rectifier and Battery.
http://www.trailtech.net/dc_conversion.htm
PART #: 040-BATT4.5
PART #: 7002-RR150
I know how to hook these up already.
So my ground is floated and I basically have DC Power. My Friend welded me up a battery box to hold the battery which is already mounted to my frame and I will be using Ensulite Foam to help isolate the battery from vibration and impact.
Will be using either 1 of these switches per light or per pair depending on how much current these HID's pull while warming up http://store.maxdy.com/swledrkbl.html
They will be mounted to my radiator cover in front of the handle bars.
So what's left?
I need help finding
a small Fused Distro block that is about 3 inches x 4 inches with 5 or 6 outputs (I'll get measurements tonight)
a lighted primary switch that can handle 20-30 amps.
Or, some type of Circuit that can be epoxied to the battery box (before painting it) that can house a 1 watt Luxeon LED driven at 150ma efficiently.
The Lux would be wired parallel with the switches output line. Circuit would need to be fairly efficient and cheap.
