OMG! I just read the Manual. There's "Function Sets"!! I never read the manual. I really have to apoligize for that.
Function set #1 General Use - Full power/Low power/Eco #2 Outdoor Use - Full/Low/Strobe #3 Law Enforcement - Momentary/Full/Eco #4 Tactical - Momentary/Full/Strobe
It comes set for Standard Mode. To change Function Sets, Uncerew the tail cap, till contact breaks. Wait 2 seconds, then press the switch and hold. Turn the tail cap back in and keep holding the button till the light starts to blink, (4 seconds). The number of the function set is the number of blinks. Choose a set by releasing the button after the number of blinks that corresponds to the set you want. One, Two, Thee or Four blinks. Then you will be in that function set. Repeat the process to change to another set.
I will have to try that and see if I can do it. Sorry for nort doing my review properly to begin with.
EDIT: I have just tried it and it does work.
- Unscrew the TC a half turn
- Wait 2 seconds and then push and hold the switch
- Turn the TC back in tight
- Continue to hold for 4 seconds
- The light will blink once, meaning function set 1 - let off the switch if you want function set 1 or continue to hold for the other function set.
- If you continue to hold, after 2 more seconds the light will flash two times, signifying function set 2. You can figure out from there, if you continue to hold in the switch, you get three blinks and then four blinks and you let off just after the number of blinks you want, for the function set you want.
It works and I tested all modes.
Remember that when you change the different modes in each function set, like H/L/Eco, you have to be quick. Quick clicks... You have to start with the light off and click very quickly, one/two/ or three clicks, to get the level you want.
Hope this hepls some.