-
You must be a Supporting Member to participate in the Candle Power Forums Marketplace.
You can become a Supporting Member.
Sold/Expired HDS, Novatac, Oveready, Streamlight, 4Sevens, Malkoff, Surefire, Veleno Designs
- Thread starter jdboy
- Start date
Help Support Candle Power Flashlight Forum
toastystuff
Enlightened
- Joined
- Apr 12, 2013
- Messages
- 652
Re: HDS, Novatac, Oveready, Streamlight, 4Sevens, Malkoff
I'll take drop in
I'll take drop in
toastystuff
Enlightened
- Joined
- Apr 12, 2013
- Messages
- 652
Re: HDS, Novatac, Oveready, Streamlight, 4Sevens, Malkoff
Payment sent!
Payment sent!
nidhoggr
Newly Enlightened
Hi I'd be interested in the e2d
PM incoming
Tribull
Enlightened
Sir, may I ask the condition of the Malkoff?
Both of the Malkoff/VME combos are in "like new" condition.
Last edited:
Tribull
Enlightened
I'll take the 2xAA combo.
PM incoming
DimLite
Newly Enlightened
I'l take the Malkoff 1xAA body w/VME head and M61 219B V2 drop-in - $85.
PM incoming
Just to make sure you noticed this, that's a 6V drop in so you'll need a 14500 cell. I'm running a KeepPower in it at the moment.
DimLite
Newly Enlightened
Yep, I'm aware this is 3.4 - 9 V. module, but thank you for emphasizing it.
I have a few AW 14500s; plus other hosts to run a 16650 or 16340s.
Also, at less than 3.4 V. (Eneloop AA) it should drop out of regulation and run direct drive -- have you tried that?
PM replied.
PayPal sent.
Thank you.
I have a few AW 14500s; plus other hosts to run a 16650 or 16340s.
Also, at less than 3.4 V. (Eneloop AA) it should drop out of regulation and run direct drive -- have you tried that?
PM replied.
PayPal sent.
Thank you.
Actually I had tried it with a standard AA but never a Eneloop. With a standard AA it won't turn on at all.
Pre-Payday BUMP, only remaining item is the Oveready P70 host. For anyone on the fence here, if you were to build this host new with the new tailcap and DellSuperman high amp switch the cost would be $207 without a drop-in!! Get it cheap now!
DimLite
Newly Enlightened
Received the Malkoff 1xAA body w/VME head and M61 219B V2 drop-in today.
Thanks for the prompt shipping; & secure packaging.
Tried several battery configurations. Will run at about 1/3 full output on a partially depleted (2.92v) CR123; but on no lower voltage. The M61 modules that will run on 1.2 - 1.5v must be the L, LL, LLL versions.
Thanks for the prompt shipping; & secure packaging.
Tried several battery configurations. Will run at about 1/3 full output on a partially depleted (2.92v) CR123; but on no lower voltage. The M61 modules that will run on 1.2 - 1.5v must be the L, LL, LLL versions.
