Hi all - just a follow up.
I've ended up gluing a magnet on the tailcap of the ZL for extra protection of the magnet from cracks.
If anyone is interested this is what I got:
- N52 disk magnet from KJ magnets with dimensions 3/4" dia. x 1/8".
- Silicone mold made from familymolds with dimensions 24mm dia. x 6mm.
- Epoxy resin and a gray pigment so the epoxy would be similar color with the body of the zebralight.
- Epoxy glue - JB weld
- Sand paper
- A lot of patience
So first I placed the magnet in the silicone mold and poured the epoxy resin. After the epoxy hardened I sanded down the edges of the mold. Then I used the JB weld to weld the now epoxy with embedded magnet onto the ZL's tailcap.
After it was all done I sanded down the excess epoxy glue and voila.
Here are some screenshots of the process:
https://imgur.com/gallery/bqODZcq