Recent content by davegLED

fenix-store
  1. davegLED

    Emitter without Heatsink

    Thanks guys lots of good tips there.
  2. davegLED

    Emitter without Heatsink

    Bingo, this is what I was looking for. Cheap, can be driven straight from 12v wall wart and simple to implement. Just need a glass cutter for bottom of bottle...
  3. davegLED

    Emitter without Heatsink

    I want to put an LED in some cool liquor bottles I have. Mains powered (with 3.3v or 5v wall wart etc) to avoid annoyance of changing batteries. Don't want a heatsink and after the simplest solution in regards to driver etc. Perhaps a 5mm LED with current limit resistor is the way to go but...
  4. davegLED

    Will I need a dive light...

    Very helpful DaYerk, Can't wait to receive my camera now! Dave
  5. davegLED

    Will I need a dive light...

    Great info DaYerk, Mine is still in the post so will have to experiment when it arrives. Any pictures of your enclosure if you have them are always great :thumbsup: Thanks, Dave
  6. davegLED

    Will I need a dive light...

    Thanks DaYerk, Were the pictures/video not useable at all? Can you recommend an external housing? Thanks, Dave
  7. davegLED

    Will I need a dive light...

    Hi Delphinus, Thanks again, that looks like a great light :twothumbs Dave
  8. davegLED

    Will I need a dive light...

    Re: Will I need a dive light for video... Fantastic info thank you Delphinus. I am only really interested in taking videos since the camera doesn't offer enough control for pictures. I will be buying an auto-magic filter you recommended since the camera only has auto-WB and I am diving in the...
  9. davegLED

    Will I need a dive light...

    for down to 25m in bright daylight (Thailand) to get enough light to film with a GoPro Hero HD video camera I picked up recently: http://www.goprocamera.com/ I've never filmed underwater before and won't get a chance to test before I go. Thanks for your input guys and gals. Dave
  10. davegLED

    Source for NiMH Charger in UK

    Yes it is a feature since it doesn't have single charge channels: 2 or 4 pieces of AA or AAA at a time
  11. davegLED

    *NEW* Fenix TA20 & TA21!!

    Does anyone else not like the look/style of the over-fussy heads of these torches? They look like nice models - just I prefer a simpler design.
  12. davegLED

    BessieBenny's Budget LED (DX/KD etc) Flashlights Review Roundup (Part X)

    Help me choose - narrowed choice to 2 lights I have a Fenix LD10 with OP reflector - my first real torch. I'm about to buy my first Li-ion torch to step up the ladder. I want something brighter with better throw but still small enough to EDC. I don't want to spend loads of $$$ with my first...
  13. davegLED

    Maha MH-C9000, the Wizard One Charger (Part 2)

    I thought about this when I charged my Eneloops. Whilst the low 0.1C won't do much harm I discharged mine first to be careful.
  14. davegLED

    Running two 3.7V LEDs from 12V

    After plenty of searching I found a thread where someone had placed the heated star on a metal plate to remove the emitter. I simply put the star board on the aga plate. Someone used a knife to hold down the board whilst I pushed the emitter sideways. As soon as it moved I lifted one edge up...
  15. davegLED

    Running two 3.7V LEDs from 12V

    On no! I've just read this website: http://www.tomsarazac.com/tom/Bicycles/dualcree.html I now think I should have bought bare emitters and glued them straight to my heatsinks. How easy is it to remove the Cree Q5s from the star boards? Pretty tricky I'd imagine?
See more

Latest posts

Top